Back to search

National Technical University of Athens (NTUA)

Μοντελοποίηση και προσομοίωση ασύρματου δικύου επικοινωνίας εντός οδικού περιβάλλοντος (IEEE 802.11p), σχεδίαση με χρήση της γλώσσας VHDL (IEEE 1076) και υλοποίηση σε XILINX FPGA

Abstract

dc:description

The objective of this Ph.D. thesis is the analysis, the simulation and the performance improvement of the physical layer for the Automotive WLAN standard. IEEE 802.11p WAVE standard (wireless access for vehicular environment) is being considered as a promising wireless technology for enhancing transportation safety and provides safety related services like collision avoidance and emergency breaking. This includes data exchange between high-speed vehicles and between the vehicles and the roadside infrastructure in the licensed ITS band of 5.9 GHz (5.850-5.925 GHz). The standard is going to be published at the beginning of 2010. In the first chapters, the 802.11p standard was presented by analyzing the physical layer’s specifications and its operations. Performance analysis of PHY model has been evaluated into different propagation conditions (AWGN, Ricean and Rayleigh fading). In particular, BER and SNR for all the data rates have been estimated. Simulation results reveal that our system can efficiently mitigate Inter-symbol interference and Inter-carrier interference introduced by multi-path delay spread in our high mobility environment but against frequency selective fading BER values are on to increase. To overcome this problem, we propose to use a different value of guard interval (3,2psec). Another solution is the employing of two different coding schemes. More specific a comprehensive investigation of the performance of Concatenated Reed Solomon Codes with Convolutional Codes and Turbo Codes is carried out over vehicular ad-hoc networks based on IEEE 802.11p specifications. In the following chapters the FEC (Forward Error Correction) system model in the transmitter with the original coding scheme and the two alternative schemes has been implemented in a Field Programmable Gate Array (FPGA) from Xilinx using the System Generator tool-flow for fast prototyping. After that the OFDM (orthogonal frequency division multiplexing) part of the transmitter was implemented in the FPGA not only in the baseband zone but also in the RF zone employing two evaluation boards from ANALOG DEVICES. In the last part of the thesis, we carried out experimental results of our system model for real time implementations and see the theoretical model variation.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kiokes, Georgios
  • Κιοκές, Γεώργιος

Subjects

dc:subject × 23

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/18624

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kiokes, Georgios; Κιοκές, Γεώργιος. Μοντελοποίηση και προσομοίωση ασύρματου δικύου επικοινωνίας εντός οδικού περιβάλλοντος (IEEE 802.11p), σχεδίαση με χρήση της γλώσσας VHDL (IEEE 1076) και υλοποίηση σε XILINX FPGA. National Technical University of Athens (NTUA), 2009. http://hdl.handle.net/10442/hedi/18624