University of Thessaly (UTH)
Σχεδιασμός, ανάπτυξη και χαρακτηρισμός νέων ηλεκτροκαταλυτών για κυψελίδες καυσίμου με απευθείας τροφοδοσία αιθανόλης
Abstract
dc:descriptionThe subject of the present PhD thesis is the design, investigation and development of novel electrocatalysts for use in Direct Ethanol Polymer Electrolyte Membrane Fuel Cells (DEPEMFCs). In Chapter 1, the targets, the novelty of the present thesis as well as a brief literature review concerning the field of DEPEMFCs are presented. In Chapter 2, the theory of Fuel Cells and especially the theory of Polymer Electrolyte Membrane Fuel Cells (PEMFCs) is explained. Moreover, the principles of operation, as well as the laws coasted their operation are also reported. In Chapter 3, the experimental apparatus constructed in order to meet the needs of the experiments is described. Furthermore, the physicochemical experimental methods and the experimental techniques used for the catalysts’ characterization are presented. In Chapter 4 the role of the structural characteristics of Pt-based catalysts on the DEPEMFC performance is examined. Several PtM/C (M = Sn, Ru, Pd, W) catalysts are characterized by means of transmission electron microscopy (TEM) and X-ray diffraction (XRD) and then evaluated as anode catalysts via V-I and P-I measurements. According to the obtained experimental results, PtSn catalysts present better electrocatalytic activity towards ethanol electro-oxidation. Thus, a series of PtSn/C catalysts with different Pt/Sn atomic ratio are tested and compared. The increase of the Sn content up to a certain extent increases the Pt lattice parameter and the cell power density. The maximum power density values obtained are correlated with the structural characteristics of the catalysts. A volcano type behaviour between the fuel cell maximum power density and the Sn content (Sn%) is observed. In Chapter 5, the catalytic activity of a series of PtxSny/C catalysts (x:y = 2:1,3:2,1:1) towards ethanol, acetaldehyde and acetic acid electroxidation is examined by means of cyclic voltammetry. According to the experimental results, the Sn addition strongly enhances the Pt activity towards the ethanol electroxidation; however the activity enhancement depends on the temperature and the Sn content of the catalyst. Sn poor catalysts exhibit higher catalytic activity in low temperatures, while Sn rich catalysts present better performance at higher temperatures. In the case of acetaldehyde electroxidation, Pt1Sn1/C catalyst exhibits the highest catalytic activity. Finally, in the case of acetic acid electroxidation, the current densities recorded during the cyclic voltammetry measurements are very low indicating that the Sn can not substantially promote the C-C bond breakage and the oxidation of acetic acid. In Chapter 6, the Περίληψη Εργαστήριο Εναλλακτικών Συστημάτων Μετατροπής Ενέργειας vi online product analysis during the DEPEMFC operation is reported. More precisely, the effect of the cell temperature (60oC-90oC) and the cell operating current (20mA- 120mA) on the ethanol conversion, the products selectivity and the reaction yield towards each product is presented. The MEA used in the experiments is PtRu/C - Nafion 115 - Pt/C. It is found that the ethanol conversion increases by increasing the temperature and the cell current. The maximum value of ethanol conversion recorded is 4.6%, at 90οC and 120mA.
Degree
thesis:*- Grantor dc:publisher
- University of Thessaly (UTH)
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Andreadis, Georgios
- Ανδρεάδης, Γεώργιος
Subjects
dc:subject × 17- Κυψελίδες καυσίμου πολυμερικής μεμβράνης
- Αιθανόλη, Τροφοδοσία ως καύσιμο
- Ηλεκτροκαταλύτες
- Καταλύτες
- Προϊόντα, Συνεχής ανάλυση
- Μοντελοποίηση
- Προσομοίωση, Μαθηματική
- Polymer electrolyte membrane fuel cells
- Ethanol feed fuel
- Novel electrocatalysts
- Catalysts characterization
- On line product analysis
- Mathematical modeling and simulation
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Engineering and Technology
- Mechanical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/18706