Back to search

University of Patras

Βελτίωση των μηχανικών ιδιοτήτων της θραυστομηχανικής συμπεριφοράς και της αντοχής σε κόπωση ινωδών σύνθετων υλικών με μήτρα ενισχυμένη με νανοσωληνίσκους άνθρακα

Abstract

dc:description

The aim of the current PhD thesis was realised during 2004-2008 at University of Patras, Greece, in the Dept. of Mechanical & Aeronautical Engineering at the Applied Mechanics Laboratory under the supervision of Prof. V. Kostopoulos was to investigate and optimise the reinforcing effect of Multi Wall Carbon Nanotubes (MWCNTs) on a typical aerospace carbon reinforced epoxy composite. The main conclusions/findings of this PhD thesis are summarized below: • The dispersion protocol of MWCNTs onto a typical aerospace resin using a mechanical device was established. • Different techniques were investigated such as to improve the dispersion of the CNTs into the matrix material. • The reinforcing effect of MWCNTs onto a typical aerospace resin was investigated and optimized at 0.5 w.t. % using a high shear mixing device i.e. torus mill. • The CNT-enhanced aerospace resin was successfully used for the manufacturing of two CFRPs lay-ups (UD and Quasi). The nano-reinforced panels exhibited a higher tensile modulus, a 60% increased on fracture toughness, increased fatigue life and even though no significant increase was noted on the low velocity impact properties the effective compressive modulus after fatigue and the fatigue life after impact was also enhanced. The aforementioned reinforcement is attributed to the extra energy that the CNTs anticipate in order to be broken or pulled-out of the matrix material • The CNT-enhanced aerospace resin was successfully used for the manufacturing of Kevlar reinforced composite panels. The nano-reinforced panels exhibited a higher tensile modulus and a significant increase on the fracture toughness properties. • MWCNTs were successfully grafted on typical aerospace carbon fibres in order to manufacture a reinforcement incorporating two scales i.e. both micro and nano.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Καραπαππάς, Πέτρος
  • Karapappas, Petros

Subjects

dc:subject × 18

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/18811

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Καραπαππάς, Πέτρος; Karapappas, Petros. Βελτίωση των μηχανικών ιδιοτήτων της θραυστομηχανικής συμπεριφοράς και της αντοχής σε κόπωση ινωδών σύνθετων υλικών με μήτρα ενισχυμένη με νανοσωληνίσκους άνθρακα. University of Patras, 2009. http://hdl.handle.net/10442/hedi/18811