Aristotle University Of Thessaloniki (AUTH)
Μη γραμμικός έλεγχος αντιδραστήρων πολυμερισμού με τη βοήθεια μαθηματικού υπολογιστικού προτύπου
Abstract
dc:descriptionThe present dissertation addresses the problem of the polymerization reactor control. In the contemporary, highly competitive environment, the control field has a special meaning for the polymer manufacturers and a wider content. Nowadays, apart from the classical control elements (measurement devices, control valves, controllers etc.), a control system comprises an optimization and estimation scheme, whereas it uses a mathematical model of the process. In this broadened content, the polymerization control problem was dealt in the present study. First, the free radical suspension polymerization is studied and the mathematical expressions for the process model are developed. The study includes the free radical polymerization kinetics, taking the diffusion phenomena (cage, gel and glass effect) into to account, whilst the mass balances for the reaction species are developed. Moreover, the molecular weight distribution and particle size distribution are calculated using the orthogonal collocation on finite elements method and the fixed pivot technique, respectively. Next, the pilot plant, installed in the B' laboratory of Chemical Engineering department at A.U.Th. and in which the experimental work, presented in this dissertation, has taken place, is described. The electrical and electronic equipment of the pilot plant is thoroughly presented, whereas a graphical user interface for the computer aided operation of the pilot plant is developed. The energy balances for the reactor dynamics and the mathematical description of the pilot plant control system are presented next. Furthermore, the effect of the filter type in acquisition of the experimental data is studied. Last, but not least, is the learning of the experimental measurement techniques, taking special care on the measurement of monomer conversion, average molecular weights and molecular weight and particle size distributions. Using the full version of the model, which comprises the polymerization kinetics, the dynamic behavior of the batch reactor and the control system, a parameter estimation scheme is applied, followed by the experimental validation of the proposed model. The outcome of the implementation of the parameter estimation scheme clearly shows that the values of the two unknown parameters can be considered constant and independent of the implemented profile of the mixture temperature. The experimental validation of the model deals not only with the prediction of the monomer conversion and the average molecular weights, but also with the dynamic evolution of the molecular weight distribution in a free radical batch suspension polymerization reactor operating up to very high conversions. Based on the proven validity of the proposed model the problem of the calculation of the off-line open loop optimal temperature profile for the production of a polymer with a desired molecular weight distribution in minimum batch time is addressed. The first case study deals with the production of a polymer with a unimodal molecular weight distribution whilst the second one deals with the production of a polymer with a bimodal molecular weight distribution. The calculated time optimal trajectories are then applied, as set point temperature changes, to the pilot plant polymerization reactor. The direct comparison between the experimental measurements and the theoretical predictions shows the ability of the proposed optimization scheme to predict accurately one of the most important polymer properties, the molecular weight distribution. Finally, a comprehensive population balance model is developed to predict the dynamic evolution of the particle size distribution in non-reactive liquid-liquid dispersions and reactive liquid(solid)-liquid suspension polymerization systems. The effect of the factors that affect the particle size distribution is also analyzed. The knowledge of this effect is of great importance to the accurate control of the particle size distribution since these factors are the main manipulated variables.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2008
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Saliakas, Vasileios
- Σαλιάκας, Βασίλειος
Subjects
dc:subject × 20- Βέλτιστος έλεγχος
- Εκτίμηση παραμέτρων
- Αριθμητικές μέθοδοι
- Πειραματική μελέτη
- Κατανομή μοριακού βάρους
- Κατανομή μεγέθους σωματιδίων
- Μεθακρυλικός μεθυλεστέρας
- Πολυμερισμός
- Optimal control
- Parameter estimation
- Numerical methods
- Experimental study
- Molecular weight distribution
- Particle size distribution
- Methyl methacrylate
- Polymerization
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/18869