Aristotle University Of Thessaloniki (AUTH)
Φαινόμενα μεταφοράς και χημικών αντιδράσεων σε παγίδες αιθάλης με καταλυτική επίστρωση
Abstract
dc:descriptionThe main target of this thesis is the study of coupled transfer and reaction phenomena that take place in Catalyzed Diesel Particulate Filters. The study is based on measurements and simulation tools of the transient behavior of particulate filters and oxidation catalysts, which have been developed by Laboratory of Applied Thermodynamics. The examination of catalyzed filters begins with their filtration efficiency and pressure drop behavior during the loading conditions. The new semi-empirical mathematical model of filtration efficiency simulation is presented for first time, and validated against various operating conditions. The presence of washcoat loading increases the filtration efficiency and the pressure drop, due to the decrease of the filter’s porosity. At high flow rate conditions and large mean pore size substrate the amount of soot collected in the wall is larger, affecting the passive regeneration behavior of the filter. The Catalyzed Diesel Particulate Filter (CDPF) and the Diesel Oxidation Catalyst (DOC) were examined on their gaseous oxidation performance of diesel exhaust. At steady - state and high flow rate operating conditions the CDPF is more effective at the HC oxidation performance. At transient conditions the DOC is more effective to the gaseous oxidation performance. The study which follows examines the low-temperature passive regeneration behavior of catalyzed filters. At 330°C the systems with DOC upstream are more effective during regeneration, due to the increased NO2 concentration, which acts directly on the soot layer. At 400°C the regeneration is based on the NO2 diffusion phenomena. The study of high temperature - active regeneration performance follows. If the filter soot loading is controlled at levels below a carefully selected threshold , e.g. in the range of 8 g/l, via the regeneration control system, then the single CDPF system and the DOC+CDPF one exhibit comparable efficiencies and maximum temperatures, during the active regeneration with post injection. The study is completed with the evaluation of a zoned catalyzed filter, with axial zones of different activity. A catalyzed filter with larger precious metal loading at its front part is examined experimentally and computationally. The CDPF with the larger amount of Pt at its front part can replace the uniform coated one, with a great advantage at the cost.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Dardiotis, Christos
- Δαρδιώτης, Χρήστος
Subjects
dc:subject × 18- Παγίδα αιθάλης
- Πετρελαιοκινητήρας
- Οξείδωση
- Κατάλυση
- Διήθηση
- Μαθηματική μοντελοποίηση
- Οξειδωτικός καταλύτης καυσαερίου πετρελαιοκινητήρα
- Soot trap
- Diesel engine
- Oxidation
- Catalysis
- Filtration
- Mathematical modelling
- Diesel oxidation catalyst
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Engineering and Technology
- Mechanical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/19355