Back to search

Aristotle University Of Thessaloniki (AUTH)

Characterization and modeling of nanoscale multi-gate MOSFETs

Abstract

dc:description

The subject of the PhD is focused on theoretical and experimental studies of nanoscale multi-gate Metal Oxide Semiconductor Field Effect Transistors (MOSFETs). The theoretical part is orientated towards the derivation of analytical expressions for the potential distribution within the channel of the transistors, from which characteristic parameters of the transistors like threshold voltage, subthreshold slope (SS) and Drain Induced Barrier Lowering (DIBL) are derived. The final aim of the work is to obtain analytical compact expressions for the drain current, valid in all regions of operation, i.e. from weak inversion to strong inversion in the below and above threshold voltage regions. First, symmetrical Double-Gate MOSFETs (DG MOSFETs) are studied, whereas the study of all other types of multi-gate MOSFETs (triple-gate and gate-all-around) is based on the derived model of DG MOSFETs. Different approaches produced various and interesting solutions for the different devices. For the experimental part, the transfer characteristics of single-FinFETs and 5-FinFETs were measured at room temperature. For analysis of the experimental data, numerical simulations were performed using the three-dimensional (3-D) SILVACO-ATLAS tools to verify the theoretical speculations and optimize the device performance. A simple analytical expression is derived for the potential distribution along the silicon channel of DG MOSFET in the weak inversion region. The model is compared and verified with the numerical solution of the two-dimensional Poisson’s equation in terms of the geometrical characteristics of the transistor: the channel length (L), the silicon thickness (tSi) and the gate oxide thickness (tox). It is found that the analytical expressions are effective even for channel lengths less than 30 nm, when the ratio of L/tSi is ≥ 2-3. Using the extra potential induced in the channel due to the Short-Channel Effects (SCE), a semi-analytical expression for the subthreshold drain current is derived, through which analytical expressions for the subthreshold slope, the drain-induced barrier lowering and the threshold voltage are obtained and discussed. Comparison of DG MOSFETs with silicon and germanium as channel materials, show that the use of germanium suppresses the SCEs. Using the simple analytical expression for the potential distribution, the transconductance to drain current ratio (gm/Id) and the body factor (n) are derived for undoped silicon DG MOSFETs in the weak inversion regime. The expressions for gm/Id and n depend on a scaling parameter in a universal manner, including the channel length, the silicon layer thickness and the gate oxide thickness. A new and simple threshold voltage expression for DG MOSFETs is derived, which depends on the drain voltage and describes accurately the SCE, as verified by comparing the threshold voltage roll-off with the channel length with simulation results for different silicon thicknesses, gate oxide thicknesses and drain voltage values. The next step is to develop a fully analytical compact expression for the drain current in DG MOSFETs, valid in all regions of operation. The model is based on existing one for long-channel devices, which is properly modified with including the SCEs, the channel length modulation and the series resistance. Using a perimeter-weighted approach, based on the potential distribution in DG MOSFETs, a simple analytical expression of the 3-D potential distribution along the channel of lightly doped silicon tri-gate MOSFETs (TG MOSFETs) is derived in the weak inversion regime. The model is verified through numerical solution of the 3-D Poisson’s equation, showing that the model is valid for different positions within the channel and rounded channel corners, when the ratios of channel length/silicon thickness and channel length/channel width are ≥ 2. The transfer characteristics below threshold were produced and validated. The potential model of TG MOSFETs is extended to the case of tetragonal Gate-All-Around MOSFETs (TGAA MOSFETs), describing their potential distribution with good accuracy. DG, TG and GAA MOSFETs are compared in terms of SCE and it is shown that, with increasing the number of gates, the SCE are suppressed. Finally, the potential distribution for all multi-gate MOSFETs is combined into a single analytical expression, describing the potential distribution in DG, TG and GAA MOSFETs. Finally, an analytical potential model is also developed in the weak inversion regime of short-channel cylindrical gate-all-around (CGAA) MOSFET, based on the rotational symmetry of the cross-section of the TGAA MOSFET. Based on potential distribution model, analytical expressions for the threshold voltage, subthreshold swing and drain-induced barrier lowering were derived. A fully analytical model for the drain current is derived with including the SCEs, the channel length modulation and the series resistance based in an existing one of long-channel devices. The English abstract v proposed drain current model, valid in all regions of operation, is verified by comparing the model with simulation results. In the experimental part of the PhD, the gate and the subthreshold drain leakage currents in tri-gate FinFETs with HfO2-TiN gate stack are investigated experimentally for power supply voltage Vdd = 1 V. The origin of the gate leakage and subthreshold drain leakage currents is investigated in detail, in relation with the geometrical dimensions of the transistor. The importance of the charge-assisted sidewall gate edge tunneling current on the drain leakage current is demonstrated in the case of the narrow FinFETs. Interface charge states of different concentration at the side-wall and top-gate edges are speculated to exist, explaining the leakage current behavior. The special case of 5-FinFETs is investigated experimentally and with 3-D simulations, paying special emphasis on the effect of the fin width on the device performance. It is found that the SCEs are suppressed for fin widths below 50 nm. Device simulations indicate the existence of interface negative charges, causing a positive gate voltage shift in the transfer characteristics. The interface charges density was found to increase from 3×1012 cm-2 to 4×1012 cm-2 with decreasing the fin width from 75 to 25 nm, indicating that the interface charge density of the side-gates is higher compared with this of the top-gate. To improve the device performance, design optimization studies were made in terms of technological parameters of the extension between gate and source/drain contacts.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Tsormpatzoglou, Andreas
  • Τσορμπατζόγλου, Ανδρέας

Subjects

dc:subject × 20

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/19413

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Tsormpatzoglou, Andreas; Τσορμπατζόγλου, Ανδρέας. Characterization and modeling of nanoscale multi-gate MOSFETs. Aristotle University Of Thessaloniki (AUTH), 2009. http://hdl.handle.net/10442/hedi/19413