Aristotle University Of Thessaloniki (AUTH)
Ανάπτυξη διμεταλλικών μαγνητικών νανοσωματιδίων με διαμορφούμενη μαγνητική συμπεριφορά
Abstract
dc:descriptionThe object of this PhD thesis was to study the correlation between structural and magnetic properties of Fe-based nanoparticle systems, with technological impact. The main goal was to synthesize composition and size controlled monodisperse Fe-oxide, FePt and Nd₂Fe₁₄B nanoparticles and to investigate the parameters which define the macroscopic magnetic behavior as well as various nanoscale effects. In the first part, Fe-oxide nanoparticles with spinel structure (Fe₃O₄, γ-Fe₂O₃), were synthesized by means of the thermal decomposition of Fe precursors at various sizes ranging between 4-18 nm. The complete oxidation that takes place is characteristic for the chemical reactivity of Fe at such scale. By studying the structural and magnetic properties of 15 nm nanoparticles, at different time intervals, the oxidation process was divided into the instant reaction with oxygen after the exposure of nanoparticles to the atmosphere followed by the much slower transformation to the last oxidation product of Fe, γ-Fe₂O₃. Oxygen diffusion from the surface to the core of a nanocrystal structure is the reason for the temporal appearance of two-phase FePt - Fe₃O₄ nanoparticles. However, smaller particles, under the superparamagnetic limit (13 nm), are single-phase consisting of mixtures of Fe₃O₄ and γ- Fe₂O₃. The exact determination of the two similar structures allowed the evaluation of the magnetic behavior of 5-13 nm nanoparticles. The reduction of the particle diameter was followed by the decrease of the blocking temperature and the magnetization values while the presence of exchange coupling between the ferromagnetic core and a spin-glass surface layer was identified. For the preparation of nanoparticles consisting only from one of the spinel oxides some variations in the typical synthetic procedures were successfully applied. Moreover, the heterogeneously Pt-seeded technique and the intermediate oleate-complex formation were studied as potential methods for the synthesis of Fe₃O₄, γ-Fe₂O₃ nanoparticles using mild thermal conditions. The simultaneous decomposition of Fe and Pt precursors was used to produce FePt alloy nanoparticles or two-phase FePt - Fe₃O₄ binary mixtures or core-shell nanoparticles. In this case, the size variation is very limited under 6 nm, and the critical parameter that defines magnetic properties is the alloy composition. The high structural disordering of the nanoparticles demands a post-annealing procedure to achieve hard magnet characteristics. Some details of the synthetic procedure, like the reflux point and the heating duration, were proved to have an important role in the conversion rate of the precursors and the crystallization of the nanoparticles. In general, the intense heating leads to the increase of Fe percentage in the alloy but also to lower monodispersity, sintering effects and a partial transformation to the tetragonal ordered phase. Keeping steady heating conditions, the next step was to investigate the possibility to control alloy composition by varying precursors ratio. As observed, Fe content meets a limitation at 55% after which Fe₃O₄ is also formed. Annealing under reducing environment cause the ordering of FePt structures which can be classified in three regions depending on their magnetic characteristics. Under 30% of Fe soft magnetic phases, mainly FePt₃ and other Pt-rich alloys, dominate. Reversely, the gradual appearance of high coercive field and energy product, over 30% at Fe, shows the existence and eventually over 40%, the domination of the equiatomic tetragonal structure of FePt. Binary assemblies of FePt - Fe₃O₄ nanoparticles and corresponding core-shell nanostructures were prepared not only for their potential interest but to study the effect of higher Fe content (60-90%) in magnetic behavior of annealed samples, as well. Annealing seems to favor the Fe₃Pt phase formation that induces high magnetization values while the coexistence and the exchange interaction with tetragonal FePt, close to 60%, results in the maximum energy product value. It is important to note that the ordering of atoms in the tetragonal phase contributes to enhancement of the induced magnetic moment in Pt atoms. The fabrication of Nd₂Fe₁₄B nanoparticles, a more complicated magnetic structure, was also studied. For this reason, surfactant-assisted high-energy ball-milling, a method that combines advantages of chemical and mechanical techniques, was elaborated. The critical parameter during milling of a Nd₂Fe₁₄B powder was the milling time considering optimum conditions and materials proportions. The morphology of the sample is determined by the gradual grain size reduction, the isolation of spherical nanoparticles and finally their deformation to elongated nanoparticles. Coercivity and maximum energy product follow an increasing trend at low milling times as a result of crystallization improvement and exchange coupling between hard and soft phases. The size reduction in the nanoscale and the nanocrystal isolation by surfactants lead to the limitation of magnetic anisotropy at higher milling times. As a consequence, the point of spherical nanoparticles formation occurs many hours after the time of optimum magnetic properties for a hard magnetic material. Eventually, the synthesis of isolated magnetic nanoparticles offers unlimited possibilities of tuning the observed magnetic behavior, especially when the size and the composition is fully controlled and there is plenty of knowledge concerning related nanoscale effects.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Συμεωνίδης, Κωνσταντίνος
- Simeonidis, Konstantinos
Subjects
dc:subject × 20- Μαγνητικά νανοσωματίδια
- ΘΕΡΜΙΚΗ ΔΙΑΣΠΑΣΗ
- Δομικός χαρακτηρισμός
- Μαγνητικές ιδιότητες
- Οξείδια σιδήρου (Fe₃O₄, γ-Fe₂O₃)
- Κράμα σιδήρου (FePt, Nd2Fe14B)
- Επίδραση μεγέθους, σύστασης, δομής
- Μαγνητική αποθήκευση
- Magnetic nanoparticles
- THERMAL DECOMPOSITION
- Structural characterization
- Magnetic properties
- Iron oxides (Fe₃O₄, γ-Fe₂O₃)
- Iron alloys (FePt, Nd2Fe14B)
- Size, composition, structural dependence
- Magnetic storage
- Φυσικές Επιστήμες
- Φυσική
- Natural Sciences
- Physical Sciences
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/19519