National Technical University of Athens (NTUA)
Numerical simulation of structures under static and dynamic loading with high performance finite elements
Abstract
dc:descriptionThe primal engineering task during the analysis of a structure is to simulate the physical model in a computationally efficient way balancing the required accuracy with the computational cost. Discrete finite element modelling with beam-column elements is widely used for simulation of buildings because of its simplicity, robustness, and low computational cost. The major limitation of inelastic fibre beam-column elements for capturing inelastic effects is their inability to simulate the response of structural members that fail in shear due to their dimensions or due to the lack of shear reinforcement. When two or three dimensional finite elements are used, the shear stresses at any point are directly calculated from the element formulation. For beam column elements, the shear strain is either neglected, according to the Euler-Bernoulli assumption, or, following the Timoshenko theory, it is assumed constant along the element length and the cross-section. A more refined fibre element capable to model the response of members under high shear has always been desirable. Having a reliable analysis simulation tool, the next engineering task is the design of the structure. The majority of the seismic design codes belong to the category of the prescriptive building design codes, meaning that the strength of the structure is evaluated at one limit state between life-safety and near collapse using a response spectrum corresponding to one seismic hazard level. On the other hand, Performance Based Design is a different approach for the seismic design which includes the construction and maintenance of the building in order to ensure reliable and predictable seismic performance over its life. The goal of the thesis is to predict the response of steel and reinforced concrete structures under static and dynamic/seismic loading using different numerical simulations with the finite element method. This goal is addressed by comparing the computational performance of different finite element types and mesh discretizations. Computational performance can be assessed with respect to the achieved accuracy of each finite element modelling, having as a reference solution either a more detailed modelling or experimental results, in conjunction to the computational cost of the specific modelling. A high performance three dimensional force-based fibre beam column element is proposed for the inelastic analysis and ultimate capacity assessment of steel and reinforced concrete structures under monotonic and cyclic loading conditions involving the interaction of axial and shear forces, as well as bending and torsional moments. The implementation of the proposed element on the Performance-Based Design (PBD) concept for reinforced concrete structures subjected to seismic loading conditions is another objective of this Thesis. The majority of the RC buildings are constructed with masonry infill walls. The combination of masonry infill walls with the bearing frame of the structure, however, is often neglected during the design procedure assuming that the structural performance is not influenced. Such an assumption may lead to substantial inaccuracy in predicting the lateral stiffness, strength and ductility of the structure. Therefore a PBD procedure and an optimisation problem, for the performance of the structure, that takes into account the influence of masonry infill walls is solved. The dissertation consists of nine chapters in total, plus the bibliography and three appendices. It is organized as follows: following the introduction of Chapter 1, Chapter 2 introduces the natural beam-column element BEC. A generally applicable fibre high performance shear deformable beam-column element (HP-BEC) that accounts for the axial-shear-moment interaction is proposed in Chapter 3. Chapter 4 presents the HP BEC element in steel structures and deals with steel constitutive relationships and shear correction factor - shear flow calculation. Chapter 5 presents the HP-BEC element in reinforced concrete structures and deals with concrete constitutive relationships and contribution of vertical reinforcement. Chapter 6 is devoted to PBD of structures subject to seismic loading using the proposed element and taking into account the effect of infill walls. Chapter 7 deals with the finite element mesh generation. Chapter 8 presents high order 3D hexahedral elements, while Chapter 9 contains the conclusions, the original contribution of the thesis, and directions for future research. Finally, the bibliography is presented followed by three appendices: Appendix A, containing the notation and symbols used in the dissertation; Appendix B with the acronyms and abbreviations used; and Appendix C with a listing of publications by the author.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2010
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Papachristidis, Aristidis
- Παπαχρηστίδης, Αριστείδης
Subjects
dc:subject × 16- Προσομοίωση κατασκευών
- Στοιχείο δοκού - υποστυλώματος
- Μέθοδος ινών
- Αλληλεπίδραση ορθών - διατμητικών τάσεων
- Απόκριση κατασκευών
- Υπολογιστική απόδοση
- Simulation of structures
- Beam column element
- Fibre element
- Flexure shear interaction
- Response of stuctures
- Computational efficiency
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Πολιτικού Μηχανικού
- Engineering and Technology
- Civil Engineering
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/19693