Aristotle University Of Thessaloniki (AUTH)
Εξέλιξη δοκιμής πλάγιας επαναλαμβανόμενης κρούσης για την αξιολόγηση μηχανισμών συνάφειας και μικροαπόξεσης λεπτών σκληρών επικαλύψεων επί κοπτικών πλακιδίων και στοιχείων μηχανών
Abstract
dc:descriptionIn the frame of the present doctoral thesis the inclined impact test was developed to enable an effective assessment of the cohesion and at the same time adhesion strength of thin hard coatings. During this test, a spherical indenter impacts periodically on the coated surface under a desired maximum load at a constant impact inclination angle. The initial aim was to clarify the dominating mechanisms that act on during the coating failure initiation, by the inclined impact test. The mentioned experimental procedure is supported by a recently developed FEM simulation model that predicts the coating failure initiation, considering the mechanical properties of all materials and the adhesion strength in the coating-substrate interface. Through this model, it is possible to calculate the critical stresses in the coating and to quantify the bonding strength between the coating and the substrate as a constant of these materials compound. The inclined impact test was applied also on coated specimens in non lubricated environment, as well as on specimens of the same type and coating that were placed in lubricating emulsion. With the application of this emulsion and with the determination of appropriate experimental conditions, the diminishing of the fatigue effect from the failure mechanisms was achieved, in order to investigate exclusively the coating microabrasive behaviour. The possibility to test the coatings as deposited on bearing ring surfaces, i.e. directly on the final product, is pivotal, because the PVD process significantly affects the attained film properties and adhesion. Hereupon, the coating mechanical properties and the adhesion were investigated through the procedures based on the present doctoral thesis, in order to exhibit the application of such methodologies in a practical application that displays singularities in the conduct of the experimental procedures. Finally, especially for coatings with larger thicknesses, such as the thermal spray ones, a methodology that can quantify the coating removal rate was developed, in order to enable the direct comparison of the impact test performances of various coatings, which could be used to enhance the lifetime of parts used in specific applications.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Asimakopoulos, Antonios
- Ασημακόπουλος, Αντώνιος
Subjects
dc:subject × 26- Επικαλύψεις
- Δοκιμή πλάγιας επαναλαμβανόμενης κρούσης
- Κοπτικά πλακίδια
- Στοιχεία μηχανών
- Συνάφεια
- Μικροαπόξεση
- Μέθοδος πεπερασμένων στοιχείων
- Ρυθμός φθοράς επικάλυψης
- Coatings
- Inclined impact test
- Cutting inserts
- Machine elements
- Adhesions
- Microabrasion
- Finite elements method
- Coating wear rate
- Επιστήμη Μηχανολόγου Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανολογία
- Μηχανική Υλικών
- Επιστήμη υλικών, χαρακτηρισμός και δοκιμές
- Mechanical Engineering
- Engineering and Technology
- Mechanics
- Materials Engineering
- Materials Science, Characterization and testing
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/19793