Agricultural University of Athens
Διερεύνηση τεχνολογιών ηλεκτροπαραγωγής από ανανεώσιμες πηγές ενέργειας για αφαλάτωση θαλασσινού νερού με αντίστροφη ώσμωση
Abstract
dc:descriptionThis work focuses on the study of several topologies of a sea water reverse osmosis desalination unit powered by a hybrid renewable energy system, consists of photovoltaic panels, solar battery bank and small wind turbine. Initially, a conventional sea water reverse osmosis unit without energy recovery and powered by electricity from the main grid was experimentally studied. The nominal capacity of the desalination unit is 1.7 m³/day, contains one membrane module, one high pressure vessel, a centrifugal feed water pump powered by an AC motor with an installed nominal power of 1 kW and a positive displacement high pressure pump powered by an AC motor with an installed nominal power of 2.2 kW. The feed water was prepared in a feed water tank (1 m³) by NaCI solution with electrical conductivity of 35 mS/cm, typically isoosmotic with sea water. The specific energy consumption of the conventional unit was recorded to be 20 kWh/m³. Several modifications were made to the conventional desalination unit in order to be compatible with renewable energy coupling. Modifications like using DC motor (500 W), rotary feed water positive displacement pump, using a pressure exchanger energy recovery device of the Clark pump type and finally adding a second membrane module to increase the water recovery. In the 1st topology, the photovoltaic panels were coupled to the desalination unit through the charge controller and the battery bank. In the 2nd topology, the photovoltaic panels (846 Wp) was coupled to the desalination unit through a charge controller and solar batteries (315 Ah/24 V). Also the wind turbine was coupled through a rectifier/charge controller to the same battery bank (hybrid topology). In the 3rd topology, a buck DC/DC converter (commonly named Linear Current Booster LCB) was used between the photovoltaic panels and the DC motor to cover the DC motor starting current and generally to extend the daily operation hours of the desalination unit. In the 4th topology, the photovoltaic panels were coupled directly to the DC motor of the desalination unit, without the battery bank and in the 5th topology only the wind turbine was coupled to the desalination unit through the rectifier/charge controller and the battery bank. The experimental results showed that the specific energy consumption of the direct coupling topology was the lowest value among all other topologies, and was recorded to be in the range of (4-6 kWh/m3). The several topologies of the system were designed and simulated using TRNSYS ver. 16 software. New components were created, such as the membrane module, the Clark pump and the motor pump assembly. Specifically, for the design of the desalination unit, the ROSA (Reverse Osmosis System Analysis) software was used. Finally, a detailed economic analysis was performed for all the topologies by using the risk analysis method (Monte Carlo method). The economic analysis showed that the direct coupling of the photovoltaic panels to the desalination unit, was the most economically viable system with water production cost of 7.8 €/m³.
Degree
thesis:*- Grantor dc:publisher
- Agricultural University of Athens
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Mohamed, Essam
Subjects
dc:subject × 12Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/19876