Back to search

National and Kapodistrian University of Athens

Επιφανειακή τροποποίηση MCM-41 πορώδων πυριτικών υλικών με μεταλλικά κατιόντα και μαγνητικά νανοσωματίδια οξειδίων του σιδήρου

Abstract

dc:description

In the present work we have successfully prepared iron containing MCM-41 materials, designated as Fe-MCM-41, using an exchange route between the template of the starting material and FeCl3.6H2O. The exchange reactions were significantly affected by the network connectivity of the starting material MCM-41. Total removal (93%) and isolation (85%) of the surfactant from the initial solid MCM-41 in the form of a perchlorate salt was realized. Quantitative measurements showed that the template consisted of 33% ion pairs and 67% of ion exchangeable organic phase. The iron substituted product obtained before and after calcination at 450°C showed high crystallinity as indicated by the X-rays diffraction patterns. The calcined sample FeMS45, contained 1.6% iron, possessed high B.E.T. surface area (~1000 m2g-1), pore diameters in the class of microporous materials and an increased wall thickness comparing with a MCM-41/450 solid. The last finding indicates iron grafting into the network of the final products. Grafting of iron into the silicon oxide network is supported also by Reflectance-I.R., E.P.R. and Mössbauer spectroscopy. Iron is strongly bounded to the inorganic network of the silica and is easily accessible by molecules absorbed onto the pores of the materials. The exchange method of the template is a general route and can be applied as well for the synthesis of a variety of metal-containing MCM-41 materials (Metal: Al3+, Sn4+, Pb2+) without destroying the template and with high metal loadings. For the magnetic modification of an MCM-41 material with iron oxide particles, three methods were proposed: 1) The exchange method of the template with the positively charged trinuclear complex (Fe3Ac6O.3H2O, followed by pyrolysis of the resulted solid. 2) The adsorption of water soluble magnetite nanoparticles onto the surfaces of a calcined MCM-41 solid. 3) The impregnation of Fe(N03)3.9H20 salt onto the surfaces of a calcined MCM-41 material, followed by exposure to vapors of carboxylic acids and pyrolysis of the resultant product. The exchange method of the template with the trinuclear iron complex obeys the same principles governing the successful accomplishment of this type of reactions (network connectivity, metal loading) and leads to iron-containing MCM-41 materials of high crystallinity, thermal stability and surface area (~1000 m2/g) but with a small iron content (2,6%) and small macroscopic magnetic properties because of the lack of magnetic particles in the solid can be attributed to the total or partial destruction of the acetate units from the trinuclear iron complex due to hydrolysis of the complex onto the silica surfaces and to the small iron loading and strong iron grafting to the oxygen atoms of the SiO2 lattice. Both factors affect the aggregation of the iron centers in the solid to final iron oxide particles of certain size. However, the exchange method of the template with other cationic iron complexes could provide an efficient route for the magnetic modification of the MCM-41 surfaces (inner and external). The adsorption of water soluble magnetite nanoparticles onto the surfaces of a calcined MCM-41 material leads to products with a small iron loading (3%), weak magnetic properties (1,2 emu/g) and high surface area (1100 m2/g). The anchoring of the particles takes place at the external surfaces of the mesoporous silica owing to their larger size (~100 Å) as compared to the silica’s pore dimensions (~20 Å) and through condensation reactions between the free hydroxyl groups exhibited by a calcined MCM-41 material and the free hydroxyl groups present in the water soluble magnetite nanoparticles. However, the small number of hydroxyl groups in the porous support do not allow its modification with a higher iron loading so as to show stronger magnetic properties. Nevertheless, the particular method is simple, and can be applied for a variety of solid supports different than MCM-41, providing that possess free hydroxyl sites at their surfaces. Impregnation of the surfaces of a calcined MCM-41 material with alcoholic Fe(NO3)3.9H20 solution, followed by exposure to vapors of carboxylic acids and pyrolysis, leads to magnetically modified MCM-41 materials with a high iron loading (15%), strong magnetic properties (3,2 emu/g) and high surface area (~1000 m2/g). Due to the homogeneous dispersion of the iron centers to the inner and outer surfaces of the inorganic support and also to their accessibility to the vapors of the carboxylic acid, the method leads to large enough γ-Fe2Ο3 particles (~150 Å) highly dispersed at the external surfaces of the porous support and to very small particles (<15 Å) hosted inside the pore channels of the silica. In addition, the size of the magnetic particles can be tuned by the carboxylic acid in use and the partial coverage (surface patterning) of the silica surfaces with surfactant molecules. Finally, because of the high surface area of the modified solid and the free hydroxyl groups that contains, it is possible to further modify the material in order to attain reconstructed MCM-41 products that combine the magnetic properties of the particles with the physicochemical properties of the particular modifier. The impregnation method is simple and of general use since is applicable for the strong magnetic modification of other inorganic supports.

Degree

thesis:*
Grantor dc:publisher
National and Kapodistrian University of Athens
Year dc:date
2002

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Bourlinis, Athanassios
  • Μπουρλινός, Αθανάσιος

Subjects

dc:subject × 12

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/19909

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Bourlinis, Athanassios; Μπουρλινός, Αθανάσιος. Επιφανειακή τροποποίηση MCM-41 πορώδων πυριτικών υλικών με μεταλλικά κατιόντα και μαγνητικά νανοσωματίδια οξειδίων του σιδήρου. National and Kapodistrian University of Athens, 2002. http://hdl.handle.net/10442/hedi/19909