Back to search

Aristotle University Of Thessaloniki (AUTH)

Παραγωγή βιοαποικοδομήσιμων και βιοσυμβατών μικροκυψελωτών υλικών

Abstract

dc:description

In this thesis, foaming of various polymers using CO2 was studied. At the same time, compositions and densities of liquid and vapor phases for two binary systems at equilibrium were measured and the performance of the recently developed NRHB (Non Random Hydrogen Bonding) theory was tested. Firstly, two thermodynamic theories, the Non Random Hydrogen Bonding (NRHB) and the Statistical Associating Fluid Theory (SAFT) were used to model phase equilibria of pure fluids and mixtures. The results showed that both theories are suitable for modeling phase equilibrium of pure fluids, mixtures that contain nonpolar compounds, as well as mixtures that contain associating fluids. Furthermore, it was found that for most of the examined systems, NRHB is performing better than SAFT. The compositions and densities of the liquid and vapor phases of two binary systems at equilibrium were measured on a new experimental apparatus over a range of temperatures and pressures. The studied systems are: CO2-ethanol at 313.2 and 328.2 K and CO2-dichloromethane at 318.2 and 328.2 K and for pressures ranging from ambient up to ca. 9 MPa. The Non Random Hydrogen Bonding (NRHB) model and the Statistical Associating Fluid Theory (SAFT) were used for correlating the experimental data. A satisfactory agreement was obtained between experimental and calculated phase compositions and saturated densities. Porous structures of polystyrene and poly(D,L lactic acid) were produced using the gas foaming technique (pressure quench). The results revealed that the pore size and the foam density can be systematically reduced by applying higher saturation pressure, low foaming temperatures and a rapid pressure quench. The classical homogeneous nucleation theory, in combination with NRHB model, was used in order to describe initial nucleation as a function of pressure and temperature. Porous poly(methyl methacrylate) structures were produced using the batch foaming process and in some cases ultramicrocellular materials were formed. The effect of the foaming temperature in the final structure was investigated. The average pore size decreased, while the pore density increased with increase of the temperature until the glass transition temperature of the neat polymer. Further increase of the temperature had the opposite effect. Biodegradable polymer foams of polycaprolactone were produced with the gas foaming technique using CO2-ethanol supercritical mixtures as porogens. The effect of the ethanol content, pressure and temperature in the final structure was investigated. The results confirmed the inability of CO2 to produce homogeneous porous structures in semicrystalline polymers like PCL. The porous structures that were obtained with pure CO2 were not homogeneous and consisted of regions with different pore sizes and pore densities. On the contrary, the structures that were obtained with the addition of small amounts of ethanol were more uniform and consisted of larger pore sizes. Finally, porous structures of neat and nanocomposite poly(L-lactic acid) were prepared using supercritical CO2 as antisolvent. The uniform cross sections and the cellular pores of the final samples indicated the occurrence of a liquid-liquid (L-L) demixing process as the dominant mechanism of the phase separation and pore production. The effect of pressure, temperature and initial concentration of the polymer solution on the final porous structure was investigated. The average pore size decreased with the increase of the initial polymer concentration. On the other hand, average pore size was not significantly altered by the increase of CO2 density either by increasing the pressure or by decreasing the temperature. Finally, it was observed that the cellular structure is strongly related to the filler content.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2006

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Τσιβιντζέλης, Ιωάννης
  • Tsivintzelis, Ioannis

Subjects

dc:subject × 16

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/19937

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Τσιβιντζέλης, Ιωάννης; Tsivintzelis, Ioannis. Παραγωγή βιοαποικοδομήσιμων και βιοσυμβατών μικροκυψελωτών υλικών. Aristotle University Of Thessaloniki (AUTH), 2006. http://hdl.handle.net/10442/hedi/19937