National Technical University of Athens (NTUA)
Απομάκρυνση ρυπαντών απο εκχυλίσματα μεταλλευτικών στερεών αποβλήτων με ενεργούς διαπερατούς φραγμούς από ερυθρά ιλυ και ιπταμένη τέφρα
Abstract
dc:descriptionInadequate disposal of wastes produced from mining, processing and metallurgical activities causes often severe contamination of soils, surface streams and groundwater, due to oxidation of the residual sulphide phases and the subsequent generation of leachates characterized by high acidity and elevated concentration of hazardous heavy metal ions and sulphates. A relatively low cost alternative to pump and treat approach aiming at prevention of contamination or clean up of contaminated groundwater involves the construction, application and monitoring of in-situ permeable reactive barriers (PRBs). Despite the increasing interest in this research field, the cost of such in-situ systems remains considerable when pure reactive media (e.g activated carbon) are used. The objective of this study is to evaluate “low-cost” media suitable for PRBs and therefore improve the economics of the process. The examined reactive media included wastes or by-products from other mining, metallurgical or chemical processes such as fly ash, red mud and zero-valent iron filings. The experimental investigation involved two main sets of long-term continuous-upflow laboratory column tests: i) single-metal independent tests of Cu2+ aqueous solutions in to elucidate the individual kinetic processes and the effect of initial metal concentration, pH and pore water velocity, and ii) multi-metal component tests of synthetic AMD leachates in order to assess the performance and long term reactivity of the examined PRBs. In addition, tracer tests were carried out to identify transport related issues. Factors such as the hydraulic conductivity of each reactive material and the residence time required for efficient operation over long periods, the quality of the leachates, the loss of reactivity and porosity over time and the main removal mechanisms were also taken into account and discussed. Geochemical modeling of the removal processes, including interactions between reactive materials, heavy metal ions and sulphates, interpretation of the ionic profiles and calculation of porosity loss was also carried out by using the speciation/mass transfer computer code PHREEQC-2 and the WATEQ4F database. The interpretation of the copper breakthrough curves (BTCs) in the first set of column experiments indicates that the removal process was dependent on several operational parameters; higher flow rates, initial pH values and copper concentrations improved PRB performance. The observed copper BTCs in the fly ash and red mud columns are adequately described by the application of the Thomas kinetic model, while kinetic analysis of the zero-valent iron columns suggested that copper removal followed a pseudo first-order reaction.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2007
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Bartzas, Georgios
- Μπάρτζας, Γεώργιος
Subjects
dc:subject × 20- Ενεργά διαπερατά φράγματα
- Όξινη απορροή μεταλλείων
- Ερυθρά ιλύς
- Ιπτάμενη τέφρα
- Μεταλλικός σίδηρος
- Γεωχημική μοντελοποίηση
- Απορρύπανση υπόγειων νερών
- Εκχυλίσματα μεταλλευτικών στερεών αποβλήτων
- Permeable reactive barriers
- Acid mine drainage
- Red mud
- Fly ash
- Zero-valent iron
- Geochemical modelling
- Groundwater clean up
- Leachates generated from mining solid wastes
- Επιστήμες Μηχανικού και Τεχνολογία
- Περιβαλλοντική Μηχανική
- Engineering and Technology
- Environmental Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/19956