Back to search

National Technical University of Athens (NTUA)

Ανάπτυξη αριθμητικού αλγορίθμου δυναμικής ελαστοπλαστικής ανάλυσης γεωτεχνικών κατασκευών σε δύο (2) και τρεις (3) διαστάσεις

Abstract

dc:description

The scope of the present Thesis is to develop an analytical methodology for the performance-based design of strip and rectangular surface foundations, resting on liquefaction susceptible subsoil. Similar to what is customarily required for tire static design of such foundations, the methodology will allow for the computation of earthquake induced settlements, as well as static (post-seismic) bearing capacity degradation. As indicated by numerous case studies, building a footing directly upon the surface of a liquefiable soil layer, without prior improvement or reinforcement, is clearly out of the question, since settlements will be excessive and uneven, leading to structural, as well as operational failure. However, it is possible that such a solution becomes feasible in the presence of a sufficiently thick and shear resistant non-liquefiable soil crust, between the foundation and the liquefiable subsoil. Taking this into account, the unfavorable case of a liquefiable soil profile with a cohesive (clay) crust is considered. In cases of other materials, such as dry sand, gravel or improved soil, drainage would occur through the surface layer, thus limiting the effects of subsoil liquefaction. In order to overcome the limitations of the aforementioned studies, which relied exclusively upon a single source of information (e.g. case studies, experimental results, or numerical analyses), this effort combines all the above sources: • An extensive parametric investigation is performed, with the aid of 2- and 3- dimensional numerical analyses, in order to define the mechanisms that control the foundation performance, as well as to provide a quantitative evaluation of their effect on seismic settlements and post-shaking static bearing capacity. • The numerical methodology applied for this purpose is based on an advanced elasto-plastic constitutive model, which was calibrated against a large number of laboratory experiments;-including resonant column, as well as monotonic and cyclic triaxial and simple shear tests. • A large number of centrifuge and large-scale shaking-table tests are employed, in order to verify the accuracy and efficiency of the numerical analysis algorithm, before it is used for the parametric investigation of the problem at hand. Finally, numerous case studies, published in the international literature, are re-examined, using the proposed simplified methodology, in order to assess its range of application, as well as its accuracy, against natural field conditions.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2010

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Karamitros, Dimitrios
  • Καραμήτρος, Δημήτριος

Subjects

dc:subject × 16

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/19994

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Karamitros, Dimitrios; Καραμήτρος, Δημήτριος. Ανάπτυξη αριθμητικού αλγορίθμου δυναμικής ελαστοπλαστικής ανάλυσης γεωτεχνικών κατασκευών σε δύο (2) και τρεις (3) διαστάσεις. National Technical University of Athens (NTUA), 2010. http://hdl.handle.net/10442/hedi/19994