Back to search

Aristotle University Of Thessaloniki (AUTH)

Μελέτη επίδράσεων των συνθηκών κρυστάλλωσης ορθορομβικής παρακεταμόλης από αιθανολικό διάλυμα

Abstract

dc:description

Orthorhombic paracetamol (form II) is characterised by well-developed slip planes in its crystal lattice and as a result exhibits far better tabletability than that of monoclinic (form I). Therefore, its bulk crystallisation from solution attracts much interest as a pure form, suitable for tableting by direct compression. In this work, the effects of crystallisation conditions on the temperature changes of supersaturated ethanolic solutions after seeding with orthorhombic seed-crystals obtained by melt crystallisation were studied. The quality (composition, micromeritic and compression properties) of the resulting products was evaluated and the conditions for optimal crystal yield and orthorhombic content were elucidated. Also, the kinetics of solvent mediated transformation (induction times, tit, and activation energy, Ea) was determined. As a preliminary requirement, a simple, fast and reliable FT-IR spectroscopic method was developed for the identification of the orthorhombic form of the seed-crystals and for the determination of polymorphic composition of the crystalline product. FT-IR peaks at 836 and 806 cm-1 (not corresponding to fundamental attributions) are suggested for the identification. Intensity ratio of the 836 cm-1 band (attributed to the presence of both forms) to the 806 cm-1 monoclinic band plotted against the inverse monoclinic molar fraction (X) yields a straight line: I836/I806 = 0.515/X + 0.700 and r=0.9965 for 8 samples. Similarly, the area under the 454cm-1 band in FT-Raman spectra (which is attributed to both forms) over the area under the 465 cm-1 band of monoclinic form is inversely related to its molar fraction (X): A454/A465 = 0.482/X - 0.324 and r= 0.9954 for 8 samples. Precision (RSD %) was <5% for both the methods. Furthermore, linear regression analysis between content and intensity of characteristic XRD reflections for 4 different samples gave r= 0.9964 at 4.62 Å, and r= 0.9894 at 3.70 Å, for form II. For the content of form I, r = 0.9596 at 3.37 Å. The limit of detection for monoclinic form was estimated to be 0.012 mole fraction for both the methods. For the study of the effects of crystallisation conditions on the formation of orthorhombic paracetamol, two experimental sets based on full factorial designs, were applied. In the first experimental design different agitation rate, AR, and cooling temperature, Tc, were the independent variables. Average cooling rate (CR), time for maximum temperature deviation (tmax) and area confined between curves of measured and reference temperature-plots (AUC) were evaluated and correlated with crystal yield (Y). Also, the micromeritic (size and shape) and the compression properties, the density and the orthorhombic content of the crystalline product were evaluated and related to the main crystallisation conditions (Tc and AR) applied. It was found that crystal yield (Y) increases with AR and decreases with Tc. The ratio tmax/CR provides good prediction of Y (Y = 58.92 - 1.386 tmax/ CR, R2 = 0.964 and p = 0.0001). Both Tc and AR linearly affect crystal size and the size distribution, probably due to alterations in supersaturation, but they do not affect significantly the crystal shape, possibly due to predominance of size and form changes over those in growth rate of the different crystal faces. Density and compression properties (yield pressure and elastic recovery), are determined by the content of the orthorhombic form, which increases linearly with AR (p = 0.009) and with Tc (p = 0.039) when agitation is between 300 and 500 rpm, while tmax decreases. At 700 rpm orthorhombic content is maximised and becomes independent to Tc. In the second experimental design, lower levels of cooling temperature Tc (-20, -10 and 0 °C) were applied, agitation was fixed at high level (700 rpm) and the crystalline product was harvested after different crystallization time tH (20, 30 and 40 min) in order to increase the crystal yield but avoid transformation of orthorhombic to monoclinic form. It was found that crystal yield (Y%) increases with tH and decreases with Tc. Mean crystal size and size distribution is affected linearly by Tc, probably due to alterations in the nucleation and growth processes. The effects on the crystal shape can be elucidated only after size classification. As the crystals grow, they become more elongated, with rougher surface due to secondary nucleation and alteration in growth rate of different crystal faces. From the study of transformation kinetics in the crystallisation liquid it was found that induction times for solvent mediated transformation (tit), were remarkably longer than those corresponding to appearance of monoclinic form, when large scale collection and drying of crystalline product was applied, probably due to residual solvent evaporation. The activation energy of solvent mediated transformation (Ea=62.9 kJ/mol) is between those for nucleation in solid state and in solvent, indicating the operation of a mixed mechanism.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2002

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Al Zoubi, Nizar

Subjects

dc:subject × 15

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/20234

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Al Zoubi, Nizar. Μελέτη επίδράσεων των συνθηκών κρυστάλλωσης ορθορομβικής παρακεταμόλης από αιθανολικό διάλυμα. Aristotle University Of Thessaloniki (AUTH), 2002. http://hdl.handle.net/10442/hedi/20234