Aristotle University Of Thessaloniki (AUTH)
Ανάπτυξη υλικών για παραγωγή υδρογόνου μέσω ατμοαναμόρφωσης μεθανίου με in-situ δέσμευση διοξειδίου του άνθρακα
Abstract
dc:descriptionThe present industrial production of hydrogen, based on fossil fuels, contributes in green-house gas emissions and in wasteful energy consumption. It is thus absolutely necessary to introduce a new technology to increase the efficiency of the current process. Research has been recently focused to an alternative concept, which combines both reforming reaction and in situ CO₂ separation. Such process is known as Sorption Enhanced Reforming (SER). The presence of a CO₂ sorbent in the reformer reactor, according to Le Chatelier’s principle, boosts the feedstock conversion and leads to higher product quality. Once the material saturates in CO₂, regeneration of the sorbent, in higher temperatures, is required. Therefore, development of a sorbent material with constant regeneration ability is the key point for the economical and waste management efficiency of the process. Natural Ca-based sorbents, such as limestone and dolomite, are potentially ideal sorbents due to their wide availability, low cost and high sorption capacity. However, fast reactivity loss affects the cost of the CO₂ separation system. The present doctoral thesis focuses on the development of a CaO-based CO₂ sorbent with high sorption capacity and long life-time for high temperature applications, such as sorption enhanced reforming. Different CaO precursors were tested and among them calcined calcium acetate showed the highest CO₂ uptake ability. However, multiple carbonation-calcination cycle tests resulted in decay of the carbonation conversion as a result of sintering occurring at regeneration temperature. For this reason, a mixed oxide of CaO and Ca₁₂Al₁₄O₃₃ (75 % w.t. CaO) was synthesized and tested. The active component of the material is CaO while Ca₁₂Al₁₄O₃₃ provides a stable framework inhibiting deactivation of CaO. The CO₂ fixation ability of CaO-Ca₁₂Al₁₄O₃₃, derived from Ca(CH₃COO)₂, was higher than 35% w.t. (or 82% carbonation conversion) even after 45 cycles of sorption-regeneration. Further increase of the sorption capacity of the new material was attained by the parametric analysis of its synthesis procedure. Calcination history of the precipitate and the addition of water in between the two calcination steps (nitrates removal and Ca₁₂Al₁₄O₃₃ synthesis reaction) are of high importance for ensuring high sorption capacities. The sorbent with the lower binder content (CaO:Ca₁₂Al₁₄O₃₃=85:15) showed the highest capacity (45% weight increase or 86% carbonation conversion) in the first cycle but also a fair stability on repetitive sorption-desorption cycles. Moreover, this study investigated the operational window of methane reforming in the presence of the optimum CO₂ sorbent, CaO-Ca₁₂Al₁₄O₃₃ (85:15 % w.t.). Atmospheric experiments were conducted, at constant steam to methane ratio and catalyst mass under various sorbent masses, total feed flows and temperatures. When CaO-Ca₁₂Al₁₄O₃₃ is utilized at 650°C, the equilibrium is shifted, for all the sorbent masses and the total flow rates studied, to higher hydrogen concentration (>93%) compared to conventional steam reforming (>77%). The methane conversion attained, at 650°C, is 95% and CO₂ was reduced by 67% compared to that would have been emitted in conventional steam reforming. The observed 24% loss of methane conversion, when lowering the temperature from 650°C to 550°C, agrees reasonably well with the decrease in the carbonation rate, obtained from the mathematical model developed, due to the same temperature shift. The development and the evaluation of a new hybrid material, NiO-CaO-Ca₁₂Al₁₄O₃₃, which functions simultaneously as reforming catalyst and CO₂ sorbent for application in sorption enhanced reforming was also investigated. CaO-Ca₁₂Al₁₄O₃₃ acts as an effective CO₂ sorbent and also as a support for the active metallic Ni particles. This idea aims to overcome the complex problems related with handling of the two different solids (catalyst and CO₂ sorbent) required for sorption enhanced reforming and also to increase the industrial potential of the process by decreasing the cost of the total solid material used. The CO₂ fixation ability of the new material (56% carbonation conversion) remains unchanged for 45 cycles of sorption-desorption. It is assumed that the presence of NiO acts synergetically with Ca₁₂Al₁₄O₃₃ to the excellent stability of the novel material compared with other CaO-based sorbents. The effect of NiO loading on the catalytic functionality of the material, under methane sorption enhanced reforming conditions was studied and the results showed that conversion goes through a maximum (80%) in the presence of the hybrid material with 16 wt% Ni loading. The presence of free CaO resulted in the capture of CO₂ formed, producing a stream rich in H₂ (90%) and poor in CO₂ (2.8%) and CO (2%). However the long-term testing of the material showed fast deactivation, mostly due to sintering of its catalytic sites which is favoured by the weak interaction of Ni sites with CaO. Further improvement of the synthesis procedure of the new hybrid material is required to ensure higher dispersion of the catalytic sites on the support phase in order to attain the superior performance of the mixture of the new sorbent material, CaO-Ca₁₂Al₁₄O₃₃, with the commercial nickel catalyst. The promising results of the multicycle sorption enhanced reforming tests of CaO-Ca₁₂Al₁₄O₃₃ provide incentive for further research and evaluation under more realistic process conditions.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2010
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Martavaltzi, Christina
- Μαρταβαλτζή, Χριστίνα
Subjects
dc:subject × 20- Διοξείδιο του άνθρακα
- Υδρογόνο
- Ατμοαναμόρφωση
- Δέσμευση
- Αναγέννηση
- Θερμοβαρυτικός ζυγός
- Ενέργεια
- Περιβάλλον
- Carbon dioxide
- Hydrogen
- Sorption enhanced reforming
- Capture
- Regeneration
- Thermogradient analysis instrument
- Energy
- Environment
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/20453