Aristotle University Of Thessaloniki (AUTH)
Υλικά απορρόφησης ηλεκτρομαγνητικής ακτινοβολίας σε μικροκυματικές συχνότητες για τηλεπικοινωνιακές εφαρμογές
Abstract
dc:descriptionThe scope of this Thesis is the synthesis and characterization of new electromagnetic wave absorbing ferrimagnetic materials, as well as their utilization in realistic design of planar absorbers. Hence, a new series of hexagonal ferrites SrCo2?W were prepared with the substitution of Ni and La for Co and Sr, respectively, while their study emphasized on those properties related to the absorption of electromagnetic waves at microwave frequencies. Through experiment, in principle we confirmed the formation of W-type hexaferrites by reaction between intermediate phases (cubic and M-type or Z-type hexagonal ferrites). At the same time, it came up that single phase samples necessitate the modification of stoichiometry (excess of Sr or M-type hexaferrite units). Furthermore, compounds with Ni and La require further increase of annealing temperature and time. Samples with small values of substitution possess high saturation magnetization and low coercivity. These properties are attributed to the inherent tendency of both substituting elements towards change of planar anisotropy to uniaxial. For the same compounds we observed a decrease of resonance frequency from 17 GHz to 6 - 14 GHz and an increase of magnetic losses, which are also related to anisotropy transition. So, there is a favorable range of compositions, for which unimpeded precession of magnetic moments occurs on a surface of easy magnetization, possibly of conical shape. From the analysis of single-layer absorbers it was found that impedance matching in typical ferrites is mainly achieved through two mechanisms, the first ascribed to high magnetic losses (bulk ferrites) and the second observed for λ/4 thickness (composite materials). In composite materials under study, high reflection losses originate from geometrical matching, while the addition of Ni and La yields the appearance of maximal reflection losses at lower frequencies and for smaller layer thickness. For the optimization of the design of planar multi-layer absorbers Genetic Algorithm and two flexible objective functions were employed, with high probability of convergence to the optimal solution. In a realistic approach, composed materials were used to design multi-layer structures with narrowband absorption, that can be tuned throughout the range of 7.5 - 18 GHz. Finally, we designed layered structures with minimal possible sensitivity to errors in the actual thicknesses of the layers.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Stergiou, Charalampos
- Στεργίου, Χαράλαμπος
Subjects
dc:subject × 18- Υλικά απορρόφησης μικροκυμάτων
- Εξαφερίτες τύπου W
- Μαγνητοκρυσταλλική ανισοτροπία
- Ηλεκτρομαγνητικές ιδιότητες
- Σχεδίαση διατάξεων ηλεκτρομαγνητικής απορρόφησης
- Πολυστρωματικές διατάξεις απορρόφησης
- Βελτιστοποίηση με γενετικούς αλγόριθμους
- Microwave absorbing materials
- W-type hexaferrites
- Magnetocrystalline anisotropy
- Electromagnetic properties
- Electromagnetic absorber design
- Multilayers absorbers
- Genetic algorithm optimization
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Engineering and Technology
- Electrical Engineering, Electronic Engineering, Information Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/20532