Back to search

Aristotle University Of Thessaloniki (AUTH)

Νέα σύνθετα κροκιδωτικά υλικά με βάση το σίδηρο

Abstract

dc:description

Coagulation – flocculation process is one of the most important physichochemical processes that are widely used in water and wastewater treatment as well as in other industrial activities. In water treatment, coagulation – flocculation is employed for the removal of: a) suspended solids (diameter: 1 – 10 μm) b) colloidal particles (diameter: 0.005 – 1 μm) c) natural organic matter (NOM) d) soluble inorganic compounds i.e. phosphate ions etv e) biological matter i.e. algae, microorganisms In wastewater treatment, coagulation – flocculation is used as a method for the basic or tertiary treatment of wastewater. Under this framework, coagulation is frequently used in combination with other physicochemical or biological processes, such as ozonation, photooxidation etc. The last decades several research efforts have been conducted for the improvement of the efficiency of the process, which resulted in the development of a new type of coagulation reagents called as Inorganic Polymeric Flocculants (IPFs). Despite of the significant improvement on the properties of the IPFs due to the pre- polumerisation of the metal (i.e. iron pr aluminium), still the aggregation ability of the IPFs is still lower than that of the organic coagulation reagents. The increased aggregation ability of the organic polymers is attributed to the high molecular weight along with the presence of large polymeric chains. Therefore, the increase of the molecular weight of the IPFs will possibly result in a subsequent improvement of their efficiency. Under this framework, a new type of reagents can be developed by adding certain additives (either inorganic or organic) into the composition of IPFs. In this thesis the synthesis, characterization of the properties and the evaluation of the efficiency of the new composite coagulation reagents based on iron is studied. The composite reagents will derive from the modification of the composition of the pre – polymerized inorganic reagent, Polyferric Sulphate (PFS) with the addition of appropriate additives. As inorganic additive, the polysilisic acid is employed, while as the organic additives 3 different (commercial available) polyelectrolytes were used depending on the charfe that each one carries: a) non -ionic (Magnafloc LT-20), b) anionic (Magnafloc LT- 25) και γ) cationic (ΡDADMAC). First of all, the optimum experimental conditions for the synthesis of each composite coagulant are determined via the conduction of a number of preliminary experiments. Then, according to the optimum conditions, a number of composite coagulants for each of the 4 additives were accomplished by varying the values of certain parameters, including the relative concentration of iron and additive, the molecular ratio r = OH/Fe and under two different preparation methods (co – polymerisation and composite polymerisation). Then the main physicochemical properties (i.e. pH, conductivity, density) were determined, emphasizing on the determination of the active iron species (with the Ferron spectrophotometric method) and on the destabilisation ability via the ζ – potential measurement. Additionally, the structure and morphology of the composite coagulant were examined via the aid of advanced methods such as FTIR, SEM and XRD. Moreover, the stability of the newly prepared coagulants was recorded as a function of time. The major conclusions drawn from the study of the properties of the coagulants can be summarized as follows: a) A sort of chemical interactions between the iron species and the additives were observed i.e. the formation of a chemical bond between iron and silica for the modified coagulants by the addition of polysilicic acid or the various indications of interactions (at some extent) between the iron and the polyacrylamide for the modified coagulants by the addition of non – ionic polyelectrolyte. b) Alteration of the destabilization ability of each composite coagulant depending on the type and properties of each additive. In particular, the addition of anionic polysilicic acid results in a deterioration of destabilization ability, while the addition of cationic polyelectrolyte results in a further increase of the destabilization capacity. ................................

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2010

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Μουσσάς, Παναγιώτης
  • Moussas, Panagiotis

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/20566

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Μουσσάς, Παναγιώτης; Moussas, Panagiotis. Νέα σύνθετα κροκιδωτικά υλικά με βάση το σίδηρο. Aristotle University Of Thessaloniki (AUTH), 2010. http://hdl.handle.net/10442/hedi/20566