Aristotle University Of Thessaloniki (AUTH)
Μελέτη της επίδρασης της μικροδομής στις ηλεκτρικές και μαγνητικές ιδιότητες φερριτών νικελίου-ψευδαργύρου
Abstract
dc:descriptionIn the present study the microstructure of NiZn ferrite is examined in order to investigate the manner through which microstructure affects its electric and magnetic properties. All the samples were synthesized with the mixed oxide method. Microstructural investigations were carried out with transmission electron microscopy, conventional and high resolution, with EDS. Also, various other techniques were used, such as x-ray diffraction pattern, adsorption-desorption of nitrogen and atomic emission spectroscopy. The electrical characterization was performed with impedance spectroscopy. Magnetic characterization consists of the measurements of magnetic permeability and losses. The aim of this work is to understand the mechanism through which the microstructure affects the electrical and magnetic properties of NiCuZn ferrites. A study of the partial substitution of Ni by Cu in NiZn ferrites with the general formula (Ni1-xCuxZn0.63)Fe1.93O4 was performed. The Cu facilitates the sintering: this means that it enhances the grain growth and affects also the porosity. Meanwhile, defects such as dislocations and subgrain boundaries were observed in lower sintering temperatures. For sintering temperatures lower than the Cu reductions, the impedance were slightly increased. This is also due to the increase of the lattice constant. For Cu>0.22 and Τ>1086°C the diameters of the grains are getting bigger while Cu-rich phases are formed. This, in addition to the Cu contribution to total conductivity, leads to a drop in the impedance. The analysis of electrical measurements also revealed the two parameters that contribute to the total conductivity: grain and grain boundaries. Each one of them is affected by microstructural characteristics such as dislocations, porosity and Cu-phases differently. Moreover, the effect of an extra annealing to the magnetic properties of NiCuZn ferrites was investigated. The absence of defects after the annealing reduces the hysteresis losses, which is the predominant factor to total losses at 50kHz. Meanwhile, for higher frequencies, where eddy current losses control the total losses, the annealing caused the increase of the relative loss factor, due to the decrease of the impedance of the material.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Σακελλάρη, Δέσποινα
- Sakellari, Despoina
Subjects
dc:subject × 14Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/20582