Aristotle University Of Thessaloniki (AUTH)
Μαθηματική και πειραματική μελέτη των μορφολογικών ιδιοτήτων πολυμερικών σωματιδίων στον ετερογενή καταλυτικό πολυμερισμό αιθυλενίου προπυλενίου
Abstract
dc:descriptionΤhe present study deals with the theoretical and experimental investigation of the morphological properties of polymer particles produced in heterogeneous gas-phase catalyzed olefin polymerization, which is on of the most complex physicochemical processes found in the chemical industry. The catalytic olefin polymerization is characterized by several diverse phenomena ranging from morphological and chemical changes of the catalytic system to heat and mass transfer phenomena at the reactor level, as well as reactor stability. When all these phenomena interact to influence experimental observations, it is impossible to obtain a comprehensive understanding of the process without the use of a theoretical modelling tool. A comprehensive mathematical model promotes the correct interpretation of experimental data as well as industrial observations, since it allows one to include all important phenomena and predict their combined effect. The phenomena that characterize the heterogeneous catalytic olefin polymerization can be divided into three distinct scales of interest: the microscale which concerns the kinetic mechanisms involved in such polymerizations, the mesoscale which investigates the growth of a single polymer particle and the macroscale which focuses on the mixing phenomena, on the prediction of the morphological and molecular distributed properties of particles produced in modern catalytic olefin polymerization reactors. In the present study the investigation of meso-scale phenomena is carried out and corresponding models are presented. In the manufacture of polyolefins, knowledge of the levels of gaseous reactants and inerts (i.e., monomers, comonomers, etc.) sorbed by polymer particles at reactor conditions is of profound importance for understanding the polymerization process, and thus, the determination or/and evaluation of the final product end-use properties. Solubility diffusivity and swelling measurements of a-olefins (individual penetrants and mixture of penetrants) in semi-crystalline polyolefins, at well defined pressures and temperatures were measured in a new experimental unit. Accordingly, to evaluate the diffusion coefficients of low molecular weight penetrants, during their sorption in semi-crystalline polymers, a comprehensive dynamic multicomponent diffusion model was developed. The development of the proposed model is based on the dynamic diffusion equations of penetrants or/and their mixtures in polymer films and powders. The dependence of diffusion coefficient(s) on the penetrants concentration was calculated by employing the free volume theory. It should be pointed out that the model takes into account the extent of polymer swelling on penetrant(s) diffusion flux, resulting in a moving boundary value problem. At the same time, the ability of the Sanchez-Lacombe equation of state to predict the solubility of small penetrants in polymer matrices (e.g., a-olefins/polyolefins systems) over a wide range of pressures, temperatures and polymer crystallinities was thoroughly examined. The Sanchez-Lacombe characteristic parameters (i.e., P* , T* , r* ) are estimated using molecular dynamic procedures (MD). It should be noted that only a single binary interaction parameter, ij k , is introduced to the proposed model for the fitting of the experimental data. At the mesoscale level of modeling interest, a new mathematical model for the prediction of particle growth of a single polymer particle in heterogeneous catalytic olefin polymerizations was proposed. The growth of a single particle will control both the overall polymerization rate as well as the molecular properties of the final polymer. According to this model the generalized Stefan-Maxwell diffusion equation for porous solids is combined together with the mass balances on the various molecular species (i.e., monomer, “live” and “dead” polymer chains) and the energy conservation equation to predict the temporal-spatial evolution of temperature and monomer concentration as well as the polymerization rate in a single catalyst/polymer particle. The model describes the mass and heat transfer inside and around the polymer particle. ..........................................
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2006
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Kanellopoulos, Vasileios
- Κανελλόπουλος, Βασίλειος
Subjects
dc:subject × 20- Καταλυτικός πολυμερισμός αέριων ολεφινών
- Μοντελοποίηση ανάπτυξης πολυμερικού σωματιδίου
- Διαχυτότητα και διαλυτότητα αερίων σε πολυμερή
- Αντιδραστήρας ρευστοστερεάς κλίνης
- Μοριακές και μορφολογικές ιδιότητες πολυμερικών σωματιδίων
- Κινητική πολυμερισμού ολεφινών
- Μοντέλα ισορροπίας φάσεων
- Εσωτερική δομή πολυμερικών σωματιδίων
- Catalytic gas phase olefin polymerization
- Single particle modelling
- Diffusivity and solubility of gases in polymers
- Fluidized bed reactor
- Molecular and morphological properties of polymer particles
- Plefin polymerization kinetics
- Phase equilibrium modeling
- Internal structure of polymer particles
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/20689