Back to search

Aristotle University Of Thessaloniki (AUTH)

Παρασκευή, μελέτη ιδιοτήτων και εφαρμογές καινοτόμων αντιδραστηρίων κροκίδωσης (του αργιλίου), για την κατεργασία καθαρισμού του νερού και των υγρών αποβλήτων

Abstract

dc:description

A very important step in water and in wastewater treatment is the coagulationflocculation process, which is widely used, due to its simplicity and cost-effectiveness. Regardless of the nature of the treated sample (e.g. various types of water or wastewater) and the overall applied treatment scheme, coagulation-flocculation is usually included, either as pre-, or as post-treatment step. The efficiency of coagulation-flocculation strongly affects the overall treatment performance; hence, the increase of the efficiency of coagulation stage seems to be a key factor for the improvement of the overall treatment efficiency. Several research efforts have been devoted to improve the efficiency of coagulation-flocculation process the last 3 decades. The result of these efforts was the development of a relatively new category of coagulation reagents, the Inorganic Polymeric Flocculants (IPF’s) or pre-polymerized inorganic coagulants. They are prepared through the partial polymerization of the conventional coagulants (such as AlCl3) and their properties were intensively examined and have proved to be more efficient than the conventional simpler ones, leading to cost and operative more effective treatment. A representative example is polyaluminium chloride (PACl), which is widely used the last 20 years in water or wastewater treatment. However, in spite of their improved properties, the pre-polymerized coagulants performance still remains inferior, when compared to the performance of organic polyelectrolytes, used e.g. in water treatment. Considering the several drawbacks related with the use of organic polymers (e.g. residual toxicity, increased treatment cost) and the need for more effective treatment, the need for coagulation reagents with improved properties is obvious. In recent years, the relevant research in the coagulation-flocculation field has focused mainly in understanding the behaviour and aquatic chemistry of pre-polymerized coagulants, such as polyaluminium chloride, and to the further improvement of their properties. The main reason for the higher efficiency of organic polymers is their higher molecular weight, which implies better flocculation properties. Therefore, it was assumed that the increase of the size and molecular weight of IPFs components would probably improve further their coagulation properties. Two different approaches were studied, the increase of the most effective Al-species content (i.e. Al13) and the introduction of other compounds (inorganic or organic) in the pre-polymerized coagulants in order to produce new, composite coagulation reagents. In the present work, the second approach was studied, i.e. the modification of the composition of a pre-polymerized coagulant (such as PACl) through the introduction of appropriate additives. It is supposed that the new, composite coagulation reagents prepared through the modification of PACl will be superior to PACl regarding water or wastewater treatment. The additives used for this purpose were the polysilicates in the case of inorganic compounds and 3 different polyelectrolytes in the case of organic additives, a non-ionic (Magnafloc LT-20), a cationic (p-DADMAC) and an anionic (Magnafloc LT-25) polyelectrolyte. Initially preliminary preparation experiments were conducted and the optimum preparation conditions for the composite coagulants and for all 4 cases of additives were determined. These conditions were applied for the production of several different composite coagulants for each case, with different combinations of the molar ratio [OH]/[Al] (polymerization degree or basicity) and additives content and with the application of 2 preparation procedures (i.e. co-polymerization or composite polymerization). The properties of the prepared reagents were intensively examined with the use of several characterization methods, such as the ferron technique and the nuclear magnetic resonance (27Al-NMR) for the determination of Al species distribution and infrared spectroscopy (FT-IR) for the observation of possible alterations in the chemical bonds of the composite coagulants, due to the addition of the aforementioned compounds. X-ray diffraction spectroscopy was also applied (XRD) for the determination of Al13 and other possible Al species or other new species, possibly formed due to the presence of the additives. Moreover, the configuration of the dry products derived after dehydration of the prepared reagents was observed by using scanning electron microscopy (SEM). .........................

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Tzoupanos, Nikolaos
  • Τζούπανος, Νικόλαος

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/20724

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Tzoupanos, Nikolaos; Τζούπανος, Νικόλαος. Παρασκευή, μελέτη ιδιοτήτων και εφαρμογές καινοτόμων αντιδραστηρίων κροκίδωσης (του αργιλίου), για την κατεργασία καθαρισμού του νερού και των υγρών αποβλήτων. Aristotle University Of Thessaloniki (AUTH), 2009. http://hdl.handle.net/10442/hedi/20724