Back to search

National and Kapodistrian University of Athens

Πολυμερικά υλικά και διεργασίες για μικρολιθογραφία σε λεπτά υμένια

Abstract

dc:description

Reliable fabrication of patterned micro- nanostructures represents one of the most essential steps that are encountered in a variety of applications in the broader field of Micro- and Nanotechnology. Although a number of novel routes have been proposed for the fabrication of patterned structures, standard resist-based optical lithography continues to be the predominant technology for the fabrication of electronic and optical devices. Indeed the resist technology has been greatly advanced during the last 30 years and allowed the decrease of the electronic device dimensions. Currently, advanced 193 nm resists are available allowing the production of semiconductor devices with dimensions down to 65 nm. For the further advancement of the miniaturization technology one of the predominant proposed technologies for the 45 nm node is Extreme Ultra Violet (EUV) lithography with an exposure wavelength at 13 nm. Nowadays there is great scientific effort in order to propose appropriate material platforms that will make viable the technological advancement to 45 nm node and also to 32 and 22 nm using EUV exposure. The specifications posed for the new EUV resist materials refer firstly, to their absorbance and the appropriate photochemistry required for positive tone solubility change. In addition, the appropriate materials must provide the ability for development in aqueous base (specifically in TMAH 0.26N), which is preferential both for controllable development and for environmental reasons. Etch resistance must be higher than poly-hydroxysterene (PHS), which is used as a standard, while thermal properties of the materials must allow processing at selected temperatures in the range of 70-130 oC. High resolution imaging in the region of sub 45 nm as well as satisfactory structure quality are pursued with the combination of appropriate functional groups that provide the above properties, while resist sensitivity must be kept in the region of 2-15 mJ/cm2. Imaging quality is also associated with film thickness. The aspect ratio (height/width) in the lines must be approximately 3:1 so that the fabricated structures do not collapse due to mechanical tension. Thus, film thickness must be in the range of 80-150 nm. One of the most important parameters that contribute significantly to structure stability is glass transition temperature (Tg) and it is desirable that Tg has a value higher than 50 oC. On the other hand the Tg value greatly affects the kinetics of the reactions that lead to solubility change. Thus, the dependence of the film thickness on Tg needs to be thoroughly investigated in each case a new material or process is proposed. Finally, line edge roughness (LER) and line width roughness (LWR) have a great influence on the quality of the imaged structures and especially of structures with very small dimensions. For this reason, it is expected that molecular dimensions of the resists will have a great influence on the imaging quality of very small structures. In view of the current bibliography, two directions of high resolution lithographic materials design are proposed in the present work. In the context of the international scientific tendency that refers to the necessity of reduced molecular size in the case of EUV materials, the study of materials with small size or and small molecular weight (MW) is attempted. The first direction followed is referred to a new class of polycarbocycle molecules, specifically anthracene derivatives, with molecular diameter in the order of 1.5 nm. These compounds are investigated both as main components of molecular resists and as dissolution inhibitors in homopolymeric matrices. In particular, the first platform is radically different from the conventional copolymer based lithographic materials. Thus, the relatively small organic molecules proposed possess an etch-resistant anthracene core and additional functional groups or polycarbocycles are anchored to this core. Such functionalities include hydrophilic groups (ethers, -OH and/or cholic acid derivatives with free –OH) and tert-butyl ester groups that are sensitive to acid catalyzed solubility change. In this mode, preferable properties are controlled through the specific functional groups that are introduced in the same molecule. ........................

Degree

thesis:*
Grantor dc:publisher
National and Kapodistrian University of Athens
Year dc:date
2006

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Niakoula, Dimitra
  • Νιάκουλα, Δήμητρα

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/20799

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Niakoula, Dimitra; Νιάκουλα, Δήμητρα. Πολυμερικά υλικά και διεργασίες για μικρολιθογραφία σε λεπτά υμένια. National and Kapodistrian University of Athens, 2006. http://hdl.handle.net/10442/hedi/20799