Back to search

National Technical University of Athens (NTUA)

Three-dimensional micromechanical models of textile fabrics

Abstract

dc:description

The current thesis aims at the development of an integrated method for the mechanical analysis of the textile structures based on their microstructure. The request for reliable textile mechanical design was intensified by their introduction in technical applications, mainly in composite materials. The literature review of the developed methods for the mechanical analysis of the textile structures was conducted. Thus the evolutionary process of the relative studies, the perspectives and limitations were presented. The modelling difficulties resulted from the structural hierarchy of the textiles were faced adopting a relative modelling hierarchy. Thus three basic modelling scales were developed: the micromechanical modelling of yarns, the mesomechanical modelling of the fabric unit cell and the macromechanical modelling of the fabric sheet. In the stage of the micromechanical modelling the typical yarn structure was studied in the fibre level. The Finite Element Method applying the beam theory enhanced with advanced solution algorithms supporting large deformation effects was implemented for the mechanical analysis. The mesomechanical modelling stage focused on the apparent mechanical properties of the fabric unit cell. In the current stage the representation of the filaments constituting the yarns was omitted and the yarns were represented as homogenous structures. The macromechanical modelling stage of textile structures refers to the mechanical performance of the fabric sheet in complex deformations. The reduction of the computational cost demands the omitting of the representation of the structural unit cells. Thus the discrete structure of the fabric was replaced by a continuum model. The reliability of the macromechanical models was evaluated using experimental data. Then the thesis focused on the simulation of the fabric drape test. The fabric drape corresponds to an extremely complex deformation given that the fabric is bent in several planes forming the folds. The proposed textile modelling approach was implemented for the study of the compression performance of a spacer fabric. The warp-knitted spacer fabrics are successfully introduced in building constructions as thin sheet component reinforcement for wall panels, exterior siding etc. Finally the adequacy of the proposed approach of textile design, the limitations of the method and the perspectives for further work was discussed.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2010

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kallivretaki, Argyro
  • Καλλιβρετάκη, Αργυρώ

Subjects

dc:subject × 18

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/21045

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kallivretaki, Argyro; Καλλιβρετάκη, Αργυρώ. Three-dimensional micromechanical models of textile fabrics. National Technical University of Athens (NTUA), 2010. http://hdl.handle.net/10442/hedi/21045