National Technical University of Athens (NTUA)
Συμβολή στην δυναμική των τροχοφόρων οχημάτων: σύγκριση δυναμικής οχήματος με ηλεκτρονικό σύστημα ελέγχου ευστάθειας (ESC) και οχήματος με σύστημα τετραδιεύθυνσης (4WS)
Abstract
dc:descriptionIn the present thesis, we compared and evaluated the dynamics of two active systems that control vehicle dynamics, Electronic Stability Control (ESC) and Four-Wheel Steering (4WS), in open and closed-loop tests. The simulation of the tests was performed with the use of a 10 DOF model, for the calculation of vehicle motion and the Magic Formula tyre model, for the calculation of the forces induced by the tyres. In order to control the vehicle, during the closed-loop tests, a comprehensive driver model was developed, that is capable of controlling the longitudinal velocity and the lateral position and heading of the vehicle, so that the vehicle can follow a predefined trajectory. Electronic Stability Control (ESC) was implemented by using the available data on the algorithm used by commercial ESP system of Bosch. ESC applies braking torque on a single wheel of the vehicle in order to induce additional yaw moment and control the vehicle's motion according to the desire of the driver. Four-Wheel Steering (4WS) is comprised of two controllers for the calculation of the steering angle of rear wheels. The first controller is an open-loop proportional controller based on the steering wheel angle and the second one a closed-loop controller based on the deviation of the vehicle from the desired state of the vehicle that is calculated in the same way as in the case of ESC. The analytical estimation of the operating parameters of the driver model and the control systems (ESC-4WS) is not possible, due to the non-linearity of the dynamic system and the parameters were selected with the use of a genetic algorithm for parametric optimization. The simulation of the model was performed with the use of Simulink software and optimization code with parallel processing capabilities was developed. We performed simulation of two open-loop tests and specifically step and sinusoidal input (ISO7401) and three closed-loop tests and specifically, corners with fixed curvature, obstacle avoidance test (IS03888) and a real path. According to the evaluation of the control systems, with the use of a penalty function, in the open loop test, the 4WS only vehicle has shown a better behaviour than the ESC only vehicle, whereas in the closed loop tests, the ESC only vehicle has achieved better results. The vehicle equipped with a combination of ESC and 4WS has achieved consistently better results in all our tests.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2010
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Chatzikomis, Christoforos
- Χατζηκομής, Χριστόφορος
Subjects
dc:subject × 16- Οχήματα
- Δυναμική οχημάτων
- Ηλεκτρονικός έλεγχος ευστάθειας
- Τετραδιεύθυνση
- Προσομοιώσεις
- Βελτιστοποίηση
- Vehicles
- Vehicle dynamics
- Electronic stability control (ESC)
- Four wheel steering (4WS)
- Simulation
- Optimization
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Engineering and Technology
- Mechanical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/21082