Back to search

National and Kapodistrian University of Athens

Χαρακτηρισμός φίλτρων από πορώδεις υάλους

Abstract

dc:description

On vycorization, borosilicate glasses undergo a phase separation. The resulting two portions are topologically continuous and the most soluble B2O3 -rich phase may be leached out. The nature of this interconnected matrix has been investigated relative to the stability of phases within the miscibility gap . The separation procedure has been interpreted by two different mechanisms, namely: nucleation and growth, and spinodal decomposition. The geometrical nature of the interface has been examined, too. In most of the cases it was suggested that the surface is fractal, while in a few others it was alluded a Euclidean one. By scrutinising the geometry of the surface boundary, it is possible to gain information on the morphology of the pore structure; In this dissertation, we report results on Vycor 7930 porous glass obtained by adsorption in conjunction with small-angle scattering of neutrons and x-rays (SANS and SAXS). In both cases, a number of scattering curves at various relative pressures (p/p0) was determined. Contrast matching at the solid/film interface was attained too. For SANS the adsorbate was a mixture of 65% D2O and 35% H2O, whereas for SAXS it was CH2Br2. For dry samples, a fractal interface with a fractal dimension D~2.6 was estimated. Leached glasses are expected to exhibit a silica surface consisting of many dangling bonds. For H2O, the SANS data indicates a very low upper cut-off for the fractality in Vycor. Thus, a reaction between H2O and silica yielding a soft hydrogel is assumed. On the way to the surface, H2O molecules pass through a batch of dangling bonds hasping by hydrogen bonding and hauling down to the base line. On the surface, the adsorbed molecules condense within small cavities initiating the gelation process locally; a smooth surface is observed As p/p0 increases the gelation process advances from local regions to the whole extent of the silica surface resulting to a diffuse boundary, i.e. D<2. Opposite, the SAXS data suggests that CH2Br2 defractalizes the Vycor surface rather ploddingly. This may be explained as follows. If the base line has D<2.5, where 2.5 is a critical exponent , the molecular tiling will affect only the rough character of the surface and will leave invariant the fractal one. Therefore, deroughening rather than defractalization occurs . At p/p0~0.76 the adsorbed film acquires liquid-like properties and thus a smooth surface is observed . The surface morphology of a Vycor porous glass was examined by a dynamic technique, too. To this end, the Vycor diaphragm was loaded with water at various relative pressures (p/p0), and after that He diffusivities were recorded. The shape of the curve suggests a PR-maximum at p/p0=0.3. This maximum can not be resolved by a trivial application of Knudsen theory. As adsorption progresses an amount of adsorbed water is deposited on the pore walls. Therefore, diameter will decrease by a value t corresponding to the thickness of the adsorbed film. and subsequently a PR-curve would be expected to decrease steadily as p/p0, increases. At p/p0=0.3 the amount of water adsorbed within the Vycor matrix is equal to about 3% w/w. The internal surface of dry Vycor is probably disturbed by a number of dangling bonds which give rise to a fractal character. When wet, the dangling bonds fall dawn rendering the surface smooth. A series of controlled porous glasses (CPGs) with pore sizes from 17 to 300 nm has been examined by very-small-angle neutron scattering (VSANS). The scattering curves show a peak in a range of Q values, depending on the particle size to the average pore size ratio. The entrapment of mercury in CPGs having undergone a complete intrusion}extrusion cycle has also been examined by VSANS. The peak positions do not vary for the mercury-loaded samples suggesting no structural changes due to the high intrusion pressures involved (60,000 psi). It was concluded that an amount of mercury blobs is trapped within the cavities of the glasses.

Degree

thesis:*
Grantor dc:publisher
National and Kapodistrian University of Athens
Year dc:date
2004

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Makri, Panagiota
  • Μακρή, Παναγιώτα

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/21306

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Makri, Panagiota; Μακρή, Παναγιώτα. Χαρακτηρισμός φίλτρων από πορώδεις υάλους. National and Kapodistrian University of Athens, 2004. http://hdl.handle.net/10442/hedi/21306