Back to search

National and Kapodistrian University of Athens

Σύνθεση, χαρακτηρισμός και ιδιότητες σύνθετων υλικών από άργιλο και νανοδομές άνθρακα

Abstract

dc:description

The present doctorate thesis focuses on the synthesis, characterization and study of selected properties of composite products. The composites are built from swellable clay minerals and nanostructured carbons. In the first part of the study the carbon phase in the composite is a nanoporous active carbon, whereas, in the second part, the carbon phase is carbon nanotubes. Clay-active carbon composites and the pure carbons obtained after removal of the mineral were prepared from intercalation of common table sugar into the clay galleries, in presence or absence of H2SO4 activator.148 The clay-carbon composites obtained after thermal treatment at 600oC under Ar flow and the carbons derived after demineralization of the clay template were examined for their aqueous adsorption properties (2-4-6 trichlorophenol and Methylene Blue) and for their gas adsorption/separation abilities regarding CO2, CH4 and N2 gases. The sorption results are discussed in relation with their structural properties (surface area, pore width and volume and surface chemistry). It was found that the properties of the adsorbents depend highly on the synthetic route, for instance, on the use of clay as structure mediating and H2SO4 as activating agent. Particularly, the simultaneous use of clay and H2SO4 leads to a synergistic action, which imparts to the final solids the highest sorption capacity and the best potential for separation of CO2 from its gaseous mixtures of CH4 and N2. Regarding the second part of the thesis, the successful growth of multiwalled carbon nanotubes on montmorillonite surfaces has been attained via chemical vapor deposition of acetylene and studied by means of electron microscopy, XRD, Mossbauer spectroscopy and thermal analysis measurements. Clay surfaces loaded with different amounts and types of metal salt catalyst precursors, namely FeCl3 .6H2O, Fe(NO3)3 .9H2O, Ni(NO3)2 .6H2O and Co(NO3)2 .6H2O, afforded clay-carbon nanotube composite products with varying carbon nanotube content and quality. The anion of the metal salt controls the hydrolysis during metal deposition on the clay surfaces and affects the transition to metal carbides at the final step of carbon deposition. Replacement of iron chloride by iron nitrate induced a minimum content of carbide impurities in the final product, while nickel nitrate proved to be the best catalyst for nanotube growth greatly improving their quality. In addition, the present work seeks the optimum conditions for the synthesis of swellable clay-CN composites. Preserving the mineral properties in the final composites is a crucial factor for their effective use in tri-phase polymeric composite materials and in other applications. The preservation of the swelling properties were successfully tested by monitoring the d001 basal spacing increase after intercalation of neutral monomers and polymers as well as positively charged organic molecules. Finally, a detailed elaboration of the transformations that iron species undergo, present in natural and Fe(NO3)3 loaded montmorillonite, during carbon deposition and carbon nanotube growth is described. Powder X-Ray diffraction analysis, Mossbauer spectroscopy and Transmition Electron Microscopy contribute to the proper characterization of the starting materials and final products. Results point to an extensive reduction of structural and interlayer Fe(III) to Fe(II) and to the migration of the intercalated species to the vacant octahedral sites in the mineral’s lattice. Formation of stable nanometric γ-iron precipitates was also detected in the structure of montmorillonite. The crucial role of the active catalytic centers for the formation of carbon nanotubes was ascribed to a minor quantity of iron entrapped in the carbon nanostructures, identified as iron carbide. It is also demonstrated that minerals rich in surface iron oxides can serve as natural catalysts for carbon nanotube growth.

Degree

thesis:*
Grantor dc:publisher
National and Kapodistrian University of Athens
Year dc:date
2005

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Bakandritsos, Aristeides
  • Μπακανδρίτσος, Αριστείδης

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/21308

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Bakandritsos, Aristeides; Μπακανδρίτσος, Αριστείδης. Σύνθεση, χαρακτηρισμός και ιδιότητες σύνθετων υλικών από άργιλο και νανοδομές άνθρακα. National and Kapodistrian University of Athens, 2005. http://hdl.handle.net/10442/hedi/21308