National and Kapodistrian University of Athens
Μακρομοριακή αρχιτεκτονική ομοπολυμερών και συμπολυμερών του 2-μεθυλο-1,3-πενταδιενίου: σύνθεση - χαρακτηρισμός - μορφολογία
Abstract
dc:descriptionThe main purpose of this work is the study of anionic polymerization of 2-methyl-1,3-pentadiene and the synthesis of branched 2MP homopolymers, P2MP polymacromonomers, as well as linear block copolymers, triblock terpolymers and miktoarm star copolymers of type A5B (A: poly(2-methyl-1,3-pentadiene) and B: polystyrene). The anionic polymerization of 2-methyl-1,3-pentadiene was carried out with sec-butyllithium in benzene at 40oC. The polymerization time varied from 1 to 3 weeks depending on the molecular weight of poly(2-methyl-1,3-pentadiene). The molecular weights was ranged from Mn(P2MP)=2000 to 50000, and the molecular weight distribution was lower than 1.1. The temperature must not exceed 40oC, because in this case degradation of polymer chain is occurred. The polymerization of 2-methyl-1,3-pentadiene in benzene (non-polar solvent) takes place exclusively via 4,1-addition and thus leads to poly(2-methyl-1,3-pentadiene) with 99% 1,4-microstructure. Of further interest is the fact that the hydrogenation of poly(2-methyl-1,3-pentadiene) gives atactic polypropylene (PP), with narrow molecular weight distribution. Thus a variety of polypropylene with complex structures can be synthesized using the poly(2-methyl-1,3-pentadiene)’s hydrogenation. The branched homopolymers and P2MP polymacromonomers were synthesized using macromonomers, which have styrenic group at the chain-end. Studies showed that the molecular weight distribution of branched P2MP homopolymers was ~1.2, while the branched PI homopolymers was lower than 1.1. The relatively high value of molecular weight distribution is due to the enormous differences in reactivity between the poly(2methyl-1,3-pentadienyl)lithium and polystyrenyllithium. The linear block copolymers and terpolymers were synthesized with sequential addition of monomers, while the synthesis of well-defined star polymers was done using controlled chlorosilane chemistry with “living” chains of poly(2-methyl-1,3-pentadiene) and polystyrene (high vacuum techniques). The linear block copolymers and terpolymers, as well as the miktoarm star copolymers of 2-methyl-1,3-pentadiene were studied in terms of their equilibrium morphology by transmission electron microscopy (TEM). The results showed that all linear copolymers have micro phase separation except the copolymer P(2MP-b-I3,4), in which the interaction parameter Flory-Huggins is only χP2MP-3,4PI=0.0015. The linear terpolymers P(2MP-b-B-b-I3,4) και P(Β-b-2MP-b-I3,4) have two phases (lamellar morphology), as the phases of P2MP and PI3,4 are mixing. Finally the miktoarm star copolymers PS(P2MP)5, PS(P2MP)2 and PS(P2MP)3 were studied in terms of their equilibrium morphology and compared with the theoretical predictions of Milner. The results showed that Milner’s theory overestimates the interfacial curvature. It seems that the transitions of the morphologies present more linear behavior than Milner’s predictions.
Degree
thesis:*- Grantor dc:publisher
- National and Kapodistrian University of Athens
- Year dc:date
- 2003
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Mauroudis, Anastasios
- Μαυρουδής, Αναστάσιος
Subjects
dc:subject × 20- 2-μεθυλο-1,3-πενταδιένιο
- Μακρομονομερή
- Εμβολιασμένα ομοπολυμερή
- Πολυμακρομονομερή
- Διενικά κατά συστάδες τριπολυμερή
- Μικτόκλωνα αστεροειδή συμπολυμερή
- Μικροφασικός διαχωρισμός
- Ηλεκτρονική μικροσκοπία διαπερατότητας
- 2-methyl-1,3-pentadiene
- Macromonomers
- Combs
- Polymacromonomers
- Dienic triblock terpolymers
- Miktoarm star copolymers
- Microphase separation
- Transmission electron microscopy
- Φυσικές Επιστήμες
- Χημεία
- Natural Sciences
- Chemical Sciences
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/21347