Back to search

National Technical University of Athens (NTUA)

Εναλλακτική μέθοδος απογύμνωσης πετρελαϊκών κλασμάτων

Abstract

dc:description

The dissertation aims to investigate the possibility of substituting stripping steam with an alternative gas, which will be recycled in a closed loop at the process, without changing physical state. This modification of the atmospheric distillation process increases the revenues of the unit, compared with the conventional. The increases are justified as a 2 - 4% wt. increase of the unit’s yield in distillates. The utilization of an alternative stripping medium has also some side advantages, as the sparing of the enthalpy of vaporization and condensation of the medium in the unit, the reduction of the demineralized water consumption and the elimination of the water dew point corrosion of the atmospheric column’s top. The proposed modification is more environmentally friendly, because it does not produce water / hydrocarbon emulsions. The alternative stripping medium that was used for the purposes of the dissertation is the refinery’s fuel gas, which is made mainly of H2, C2H6 and C2H4. Ethane is found in the crude oil and it is produced mainly by the atmospheric distillation itself. Other sources are the naphtha reformer and the hydrocracker units. Hydrogen is a product of the naphtha reformer. Most of it is used at the refinery’s hydrotreaters and the surplus is mixed with the fuel gas. Ethylene is not a constituent of the crude oil. It is produced by cracking processes, mainly by the Fluid Catalytic Cracker Unit, (FCC). In order to simplify the calculations, the make - up stripping medium is considered to be pure C2H6. The other reasons for its selection are: • It is incondensable at the operating conditions of the atmospheric distillation. • It is abundant at any refinery. • It is not corrosive, because it is treated at amine absorber units, in order to remove the H2S. • A big amount is produced by the atmospheric distillation itself. • It does not condense and dissolve corrosive agents, as Η2Ο steam does. The conclusion of the dissertation is that “dry” stripping is feasible not only for new units, but it can also be applied to the existing ones as a revamp. The same principle can be utilized also at different processes. In fact, the conclusions of the study were utilized at the design of a new stripper column, for a lubricating oil hydrotreating unit.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Plellis-Tsaltakis, Constantinos
  • Πλέλλης Τσαλτάκης, Κωνσταντίνος

Subjects

dc:subject × 17

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/21677

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Plellis-Tsaltakis, Constantinos; Πλέλλης Τσαλτάκης, Κωνσταντίνος. Εναλλακτική μέθοδος απογύμνωσης πετρελαϊκών κλασμάτων. National Technical University of Athens (NTUA), 2009. http://hdl.handle.net/10442/hedi/21677