Back to search

National Technical University of Athens (NTUA)

Ενίσχυση μικροκυματικής γκαουσιανής δέσμης γυροτρονίου μέσω αλληλεπίδρασης με επίπεδη ηλεκτρονική δέσμη

Abstract

dc:description

Gyrotron resonators are for the moment the most powerful and efficient microwave sources and can deliver a symphonous and monochromatic radiation of ισχύος Ρ = 1 - 2 MW in the range of f = 100 - 200 Ghz. Their development as the dominant high power source in the microwave spectrum has been primarily motivated by the high power demands -approximately 24 MW- required for efficient plasma heating and current drive in fusion reactors like ITER. However, intrinsic technological and physical constraints have limited the commercial output power of the device to 1 MW, whereas the coaxial gyrotron designed by the E.U. which is about to be delivered and installed in ITER reactor, will hopefully provide an output power of P ≃ 2 MW. However, the large amount of devices that needs to be mounted in ITER as well as the increase of the required power of the future fusion reactor DEMO (that is currently under design), make gyrotrons an expensive and inefficient solution. Therefore, another type of ECM interaction was studied, which is very similar to the initial concept of Quasi-Optical Gyrotron (QOG), and shares most of its advantageous features, but the most important, it overcomes all of its important draw-backs that leaded QOG to a low-efficiency operation. The proposed configuration investigates the feasibility to amplify the Gaussian microwave beam that is generated in a conventional gyrotron via its interaction with a sheet electron beam that propagates along a magnetostatic field and intersects the gyrotron beam at a right angle, and is called Free Space QOG since the interaction takes place in free space, far away from any cavity or wall. One of the most important features of the FSQOG is the lack of any cavity or resonator; this characteristic practically eliminates the ohmic losses which otherwise would have been developed on the conducting walls due to the inductive current. Without any cavity wall imposing boundary conditions, a single-mode operation is expected at the frequency provided by the gyrotron, without concerning about mode competition that eventually leads to energy dissipation. Moreover, because of the ample volume of the beam tunnel, the electron beam can carry a large amount of current -and consequently a substantial power- in a low charge and current density, though, assuring that no significant space-charge effect would compromise the stability and the properties of the electron beam. Since we consider an interaction with a propagating rather than a standing wave, the electron beam can be introduced in maximum-field positions, whereas the thickness of the sheet electron beam is limited by the size of the waist of the Gaussian, which is typically several times larger than the transverse wavelength (the limiting factor for beam thickness in conventional hollow-beam gyrotrons). Finally, since the sheet electron-beam simply amplifies an existing well-established radiation beam, no threshold represented by the start-up current is applicable; a low-current electron beam would still amplify the initial gyrotron beam, although by a much smaller amount. In order to implement the electron-wave interaction, a self-consistent scheme was introduced, which composes a system of -nonlinear- equations, for the electrons affected by the radiation and for the electromagnetic field excited by the electrons. For the numerical solution of this system of equations, an iterative procedure was adopted, in which the radiation fields (or the electron motion) are obtained using the latest approximation for the electron properties (or the field distribution, respectively), with the procedure repeated, until convergence is reached, that is, until the output from each set of equations is consistent with the input to the other set. Large scale simulations have indicated that the interaction -even for a set of initial parameters and conditions not thoroughly optimized- can yield a substantial electronic efficiency of about nₑ~ 25 - 35% which results in a more than 100% gain of the initial 2 MW-gyrotron beam, and a total output power of approximately Prf ~ 4 MW that is practically unreachable using conventional gyrotrons or any other microwave source. The produced radiation retains to a great extent its Gaussian content and is largely confined near the initial axis of propagation, therefore no significant diffraction losses are expected, as well as the introduction of a depressed collector can increase the interaction efficiency to ntot ~ 50%. The appearing success of the proposed configuration is based on the fact that its design can be easily applicable to amplify microwave radiation far beyond the frequency and the power required in fusion plasma applications.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2010

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Anastassiou, Georgios
  • Αναστασίου, Γεώργιος

Subjects

dc:subject × 14

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/22453

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Anastassiou, Georgios; Αναστασίου, Γεώργιος. Ενίσχυση μικροκυματικής γκαουσιανής δέσμης γυροτρονίου μέσω αλληλεπίδρασης με επίπεδη ηλεκτρονική δέσμη. National Technical University of Athens (NTUA), 2010. http://hdl.handle.net/10442/hedi/22453