National Technical University of Athens (NTUA)
Ηλεκτρολυτική συναπόθεση νανοσωματιδίων οξειδίων με βάση tiO2 επί μεταλλικής μήτρας και μελέτη φωτοκαταλυτικών και αντιδιαβρωτικών ιδιοτήτων τους
Abstract
dc:descriptionNanocomposite coatings were obtained by electrochemical codeposition of TiO2 nano-particles (mean diameter 21 nm) with nickel, from an additive-free Watts type bath. Pure Ni and composite Ni-TiO2 coatings were electrolytically deposited under both DC and PC conditions. The electrodeposition of Ni-TiO2 composites was carried out on a rotating disk electrode. Pure Ni deposits were also produced under the same experimental conditions for comparison. The surface morphology, the crystallographic orientation of nickel matrix, and the grain size of the deposits were investigated, along with the distribution and the percentage, of the embedded nano-particles in nickel matrix, as a function of pH, current density and concentration of TiO2 nano-particles in the bath. The observed textural modifications of composite coatings were associated with specific structural modifications of Ni crystallites provoked by the adsorption - desorption phenomena occurring on the metal surface, induced by the presence of TiO2 nano-particles. As the titania incorporation percentage is increased, a considerable grain refinement in the nanometer region was revealed followed by an improvement of the quality of the nickel preferred orientation. The influence of pulse parameters (ν, Ton, Toff, Jp) on the codeposition of TiO2 particles, preferred orientation of Ni crystallites and grain size, as well as mechanical properties of the composites, was investigated systematically. Composites prepared in PC regime displayed higher incorporation percentage than those obtained under DC conditions. The application of pulse parameters accompanied by the embedding of TiO2 nanoparticles in the nickel matrix resulted in a strong influence upon the crystalline orientation, the grain size and the corresponding microhardness, tribological behaviour and corrosion resistance. Overall, when ascribing the observed strengthening effect of composites, not only grain refinement and dispersion strengthening mechanisms, but also preferred crystalline orientation should be taken into consideration. The experimental data deduced by the combination of three spectroscopic techniques (SEM, EDS, and Raman) indicate that the sliding wear mechanism could be described as abrasive, adhesive and corrosive. The overall self-cleaning character of the Ni surfaces is improved as the TiO2 co-deposition percentage in nickel matrix is increased, as both hydrophilicity and photocatalytic activity are present. Simultaneous optimization of the two functionalities is possible via control of the TiO2 percentage in the deposit. Moreover, it has been confirmed that the hydrophilic character and photocatalytic performance of the composite coatings are associated to the crystalline nickel orientation and the nickel mean grain size.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Spanou, Styliani
- Σπανού, Στυλιανή
Subjects
dc:subject × 14Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/22527