Back to search

Aristotle University Of Thessaloniki (AUTH)

Development of automatic methods for trace metals determination using on-line separation and preconcentration techniques coupled with atomic spectrometry

Abstract

dc:description

The combination of flow injection analysis (FIA) with atomic absorption spectrometry has revolutionized the analytical methods and techniques. Most attention is focused on the development new methods analytical techniques. Three of on-line preconcentration methods have been developed for cadmium and lead determination using atomic spectrometric techniques. In the first part a newly simple flow injection on-line wetting film extraction system coupled to flame atomic absorption spectrometry (FAAS) was developed and optimized for determination of trace amount of cadmium. A simple manifold was designed and optimized offering several advantages over the conventional on-line liquid-liquid extraction (LLE) systems as well as it enhances the prestige of automated solvent extraction techniques. In this method the sample was mixed on-line with sodium diethyl dithiocarbamate (DDTC) and the produced non charged Cd(II)-DDTC chelate complex was extracted into the thin film of diisobutyl ketone (DIBK), which had been formed on the inner wall of the PTFE extraction coil. The wetting-film with the extracted analyte was then eluted by distilled water and was delivered directly into the burner of FAAS for atomization and quantification. In the second part, a novel automatic sequential injection (SI) single-drop micro-extraction (SDME) system is proposed as versatile approach for on-line metal preconcentration and/or separation. Coupled to electrothermal atomic absorption spectrometry (ETAAS) the potentials of this SI scheme are demonstrated for trace cadmium determination in water samples. The method was simple, highly sensitive, environmental friendly and fully automated. The strategy was based on a non-charged complex of cadmium with ammonium diethyldithiophosphate (DDPA) was to be produced and extracted on-line into a 60 μL micro-drop of di-isobutyl ketone (DIBK). The extraction procedure was performed into a newly designed flow-through extraction cell coupled on a sequential injection manifold. All the critical parameters were optimized and offered good performance characteristics and high preconcentration ratios. In the last part of the study a novel hydrophobic sorbent material named polyether ether ketone (PEEK) was presented in the form of turnings for on-line column preconcentration and separation systems coupled with atomic spectrometry was developed. PEEK-turnings were used as packing material and evaluated for trace lead determination in environmental samples. The developed sorbent material has shown, praiseworthy excellent chemical and mechanical resistance, fast adsorption kinetics permitting the use of high sample flow rates without significant loss of retention efficiency. Factorial design (2-level, 5-factors), was employed for optimization and identifying the significant chemical and variables for the on-line solid phase extraction. A further (2-level for 4-factors) factorial design was subsequently employed for identifying the most critical variables. The sample loading flow rate and DDPA concentration were the most significant variables. In order to obtain the optimum conditions with these two parameters Doehlert design with 7 experiments was employed successfully. Certified reference materials and various environmental samples as well as waste-water samples were analyzed successfully for evaluation the accuracy of the developed methods.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2010

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Adam, Ibrahim

Subjects

dc:subject × 12

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/22666

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Adam, Ibrahim. Development of automatic methods for trace metals determination using on-line separation and preconcentration techniques coupled with atomic spectrometry. Aristotle University Of Thessaloniki (AUTH), 2010. http://hdl.handle.net/10442/hedi/22666