Back to search

National Technical University of Athens (NTUA)

Υποκατάσταση γαιάνθρακα από εναλλακτικά και υποστηρικτικά καύσιμα σε λέβητες κονιοποιημένου καυσίμου για τη μείωση εκπομπών CO₂

Abstract

dc:description

Scope of the present thesis is to assess the potential of two different brown coal substitution concepts as possible options to reduce CO₂ emissions in existing pulverised brown coal power plants. The substitution of brown coal by alternative fuels is the first concept examined. Alternative fuels are non-fossil fuels with a high biogenic share. Agricultural or forest residues, which are fully biogenic, as well as waste derived fuels, which may have a high biogenic content, are considered as alternative fuels. In the present work a particular category of waste derived fuels, the Solid Recovered Fuels (SRF), which possess specific quality characteristics, are investigated. The second concept regarded is the substitution of raw brown coal by pre-dried brown coal, which is considered as supporting fuel and the respective integration of a fluidised bed drying system in the existing plant steam cycle. The first concept is demonstrated in a 600 MWₑ pulverised brown coal boiler in Germany, while dry coal co-firing is demonstrated in a 75 MWth brown coal boiler in Greece. Since the integration of a brown coal pre-drying system in an existing power plant utilising low temperature steam, has not been fully demonstrated in the large scale yet, the particular concept is investigated by thermal cycle calculations. The evaluation and comparison of the two concepts proposed is based on specific environmental, technological and economical parameters. In order to assess the performance of the two co-firing concepts in respect with the decided criteria, different analysis approaches are used. Apart from the large scale experimental activities numerical simulations based on Computational Fluid Dynamics (CFD) analysis are also carried out for the two boilers. Through the simulations additional co-firing modes are assessed, which cannot be realised in the large scale. Different injection locations for the alternative fuel are numerically examined in the case of the 600 MWₑ boiler, while the numerical investigations of the 75 MWth boiler focus on the evaluation of the boiler’s combustion behaviour under elevated dry coal co-firing thermal shares. Thermodynamic calculations are also carried out, so as to assess the expected plant efficiency increase by the integration of the fluidized bed drying concept in an existing Greek power plant. The conducted small scale investigations are used as supporting work for the assessment of the co-firing concepts in the large scale. A dedicated model on SRF combustion is developed and validated against available lab scale data. The SRF combustion model is further used in the co-firing simulations of the industrial boiler. Lignite drying tests are also carried out in a lab scale fluidised bed dryer, in order to evaluate the drying behaviour of Greek lignite in comparison with the Rhenish one. An extensive experimental campaign on Greek pre-dried lignite combustion is carried out in a 1 MWth experimental combustor. The experimental campaign is accompanied by numerical simulations and the simulation results are compared with the available experimental data. The simulation set up is used then in the large scale dry coal co-firing simulations. Beyond the environmental and technological aspects investigated, the economic feasibility of the regarded coal substitution concepts is also assessed by economic performance indices. The additional costs and revenues expected by applying SRF or dry lignite co-firing in the large scale are presented and compared. The respective CO₂ avoidance costs are calculated for each concept and economic indices are used for the evaluation of both co-firing scenarios in terms of return on investment. The overall assessment implies that the realisation of both co-firing concepts in the large scale is feasible. Environmental, technical and economic aspects are thoroughly studied. Co-firing of alternative fuels in low thermal shares in existing boilers may be applied without negative impact on the boiler’s operational behaviour or environmental performance. Some technological aspects have to be further examined, in order to assure the reliable boiler operation under continuous co-firing conditions. The control of chlorine induced corrosion at the boiler’s heat exchanger surfaces through online monitoring tools and a continuous monitoring system of alternative fuel’s quality are the recommended practices towards this direction. Considering the economic potential of SRF co-firing it is regarded as a highly profitable investment with a short payback period, due to the subsidized electricity price and the zero fuel price and has a considerable potential for reduction of CO₂ emissions. The integration of a pre-drying concept in existing lignite power plants and the implementation of dry lignite co-firing is a more complex application, which requires increased efforts on careful planning and detailed engineering. A considerable reduction in CO₂ emissions may be achieved, if elevated co-firing thermal shares up to 25% are applied. The boiler’s combustion behavior is influenced in this way in terms of furnace temperature distribution, emissions and heat balance. The performed investigations on pre-dried lignite co-firing in the case of a Greek power plant showed that large scale implementation of pre-dried lignite co-firing is feasible without specific negative impacts in terms of environmental or technological aspects. Expected changes in the boiler’s heat balance may influence the overall mass balance of the power plant; a positive effect is however expected from this change, i.e. the increase of plant efficiency. The increase tendency of NOₓ emissions has to be mitigated by a rearrangement of the firing system and the application of increased air staging conditions. From an economic point of view, the financial evaluation of the pre-drying concept indicates that it is not suitable as a retrofitting option for aged power plants, due the long investment payback period. It should be more regarded as an option to increase plant efficiency in new power plants or even in projects that are still in the design phase. Considerable reductions of the additional investment costs may be achieved through the effective dimensioning of the conventional milling and drying system in respect of dry lignite co-firing and the fluidised bed dryer operation. Concluding, the evaluation and comparison of two different coal substitution practices is attempted in the present thesis. Environmental, technological and economic aspects are taken into account and several parameters are used as evaluation indices. No final result for or against a particular technology may come out from this detailed analysis. The identification and in depth investigation of positive or problematic aspects of both concepts should be considered as the main contribution of this work.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2010

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Agraniotis, Michael
  • Αγρανιώτης, Μιχαήλ

Subjects

dc:subject × 19

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/23338

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Agraniotis, Michael; Αγρανιώτης, Μιχαήλ. Υποκατάσταση γαιάνθρακα από εναλλακτικά και υποστηρικτικά καύσιμα σε λέβητες κονιοποιημένου καυσίμου για τη μείωση εκπομπών CO₂. National Technical University of Athens (NTUA), 2010. http://hdl.handle.net/10442/hedi/23338