Aristotle University Of Thessaloniki (AUTH)
Ανάπτυξη και ενεργειακή βελτιστοποίηση αυτόνομου ξηραντηρίου γεωργικών προϊόντων με χρήση ηλιακής ενέργειας
Abstract
dc:descriptionThe present PhD thesis belongs to the scientific field of the Solar-Assisted Mechanical Drying and focuses on Convective Drying processes. The interest was on the theoretical and experimental study of an agricultural product-dryer which is partly driven by Solar Energy. In the frame of the present investigation emphasis was given on the physical phenomena developing in the drying chamber while the energy source (solar collector) was considered as given. The main scope of the theoretical study was the numerical simulation of the flow and heat/mass transfer during drying in order to investigate the mechanisms by which the flow phenomena affect the drying process. A Luikov-type diffusion model was developed for the solid product combined with a flow solver for the air flow based on the finite volumemethod. The model allowed the choice of solving either within the solid only or within both solid and fluid. In the latter case the solution is Conjugate and is particularly suited for time-dependent flows and for natural convection (passive) dryers. Initially for the numerical simulation a configuration based on the actual experimental setup was formed. The air flow around a drying body (rectangular cylinder) placed at the center of the chamber and the manner in which flow phenomena such as separation zones blockage etc. influence the transport coefficients was studied. It was also investigated whether the suppression ofseparation zones by adding a flow divider upstream of the body influences these phenomena in favor of the drying rate or not. Subsequently and due to the fact that in real-scale industrial dryers more than one trays with the product are stacked inside the investigation was extended by considering the interaction between two bodies (blunt plates) placed at alternative relative positions in the chamber. The configurations were compared in terms of flow and heat/mass transfer phenomena. In addition measurements were taken in an experimental solar dryer (driven by an air collector with evacuated tubes) for drying of several agricultural products whereby quantities such as diffusion coefficients drying rates pick-up efficiency were determined composing thus a complete picture of the drying processes. The analysis and results of the present thesis may become valuable in the design optimization of a drying chamber e.g. by ensuring favorable aerodynamic conditions during the dryer operation.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2010
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Lamnatou, Chrysovalantou
- Λαμνάτου, Χρυσοβαλάντου
Subjects
dc:subject × 20- Ηλιακά υποβοηθούμενη ξήρανση
- Μεταφορά θερμότητας-μάζας
- Υπολογιστική ρευστομηχανική
- Μοντέλο ξήρανσης
- Ροή γύρω από πλάκες
- Μοντέλο συζευγμένης μεταφοράς θερμότητας-μάζας
- Πειραματική διερεύνηση ξήρανσης γεωργικών προϊόντων
- Ηλιακός συλλέκτης αέρα με σωλήνες κενού
- Solar-assisted drying
- Ηeat-mass transfer
- Computational fluid dynamics
- Drying model
- Flow arround blunt plates
- Conjugate heat-mass transfer model
- Agricultural products drying
- Solar air collector with evacuated tubes
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Engineering and Technology
- Mechanical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/23485