Aristotle University Of Thessaloniki (AUTH)
Μελέτη των οπτικών χαρακτηριστικών σύγχρονων σκευασμάτων σύνθετων ρητινών
Abstract
dc:descriptionComposite resin materials used in restorative dentistry should closely match the surrounding tooth structure so that the restoration blends with the dental tissue in a natural manner that results to an invisible, aesthetic restoration. The optical properties of the materials are of paramount importance as well as the proper finishing and polishing of the restoration. Aim : The purpose of this study was to investigate the correlation between the color characteristics and the gloss of contemporary composite resin materials available in the market today with their roughness, after different surface treatments. Also, to investigate the effect water aging has on the aforementioned characteristics. Materials and Methods : Disk shaped specimens (10mm in diameter, 2mm thick, n=6 per material) were fabricated from the composite resin materials Ceram-X (Dentsply, DeTrey, Surrey, UK), Herculite XRV (Kerr Co, Orange, CA, USA), Filtek Supreme (3M,ESPE, St Paul,MN,USA), Premise (Kerr Co, Orange, CA, USA) and Renamel Microfill (Cosmedent Inc, Chicago, IL, USA). Consecutive treatments of the specimens were conducted, first with the abrasive system recommended by the manufacturer and then in a metallographic grinding/polishing device. The abrasives used were Enhance (Dentsply, DeTrey, Surrey, UK), Optidisc (Kerr Co, Orange, CA, USA), Soflex (3M,ESPE, St Paul,MN,USA)and Flexidisc (Cosmedent Inc, Chicago, IL, USA) respectively. Then, the specimens were aged in a water environment for 2 years. At baseline (Mylar strip polymerized - Resin Rich Layer), after each treatment of the surface, and after water aging, measurements of roughness (Ra, Rz, Rq, Rt) , color (L*, a*, b*) and gloss (GU) were performed. Roughness was measured with a skid profilometer in four different areas of each specimen after rotating them, resulting in 24 measurements per material. A 3D optical profilometer was also used to take indicative measurements of roughness (Ra, Rz, Rq, Rt) and images of the specimen surfaces. With the same method, the roughness of the abrasive systems used in this study was also indicatively measured. The optical profilometer was set in VSI function, with an area scan size of 100μm. Gloss was measured with a small area glossmeter with a square measurement area of 2x2mm and 60o geometry. The roughness, color and gloss results were subjected to statistical analysis using SPSS software (SPSS Inc, IBM Co, IL, USA). Means and standard deviations were calculated for each material on every surface condition. The normality of the data was checked with the Shapiro test and the homogeneity of variances with the Levene test. Statistically significant differences of roughness and gloss through the different surface conditions were obtained using Student’s t - test or Wilcoxon test, depending on the normality of distribution of the data. To test for differences between the materials for each one of the surface conditions, One Way Anova or Kruskal - Wallis test was used...
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2010
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Γιαννακόπουλος, Κωνσταντίνος
Subjects
dc:subject × 15Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/23507