Aristotle University Of Thessaloniki (AUTH)
Μελέτη τρανζίστορ λεπτού υμενίου (πολυκρυσταλλικών και οργανικών) και σχεδιασμού κυκλωμάτων οδήγησης εικονοστοιχείων
Abstract
dc:descriptionThe impact of the light illumination on the drain current of polycrystalline silicon thin-film transistors (TFT) is studied in this work. The increase of the output current as a result of raised light intensity is modeled, based on measured experimental data for different Vds and Vgs values and transistor sizes W/L. Also, a new semi-empirical light impact model (LIM) for both p-type and n-type polycrystalline thin-film transistors (poly-Si TFTs) is introduced and verified. The ratio of the produced current under a specific light intensity (Id) over the dark current (Idark) is calculated. The new model has been also implemented in the circuit simulation program HSPICE. For both models comparative results between measurements and simulated characteristics are presented for different sizes of Widths/Lengths, different values of the Vds, Vgs voltages and of light intensities. Furthermore, an improved optical feedback circuit is proposed with only a few components and a wide range of Vdata voltages. Its operation is verified by simulation using the HSPICE simulator, PSIA2 TFT model and our previously published light-impact model (LIM) of polycrystalline TFTs. Additionally, the new optical feedback pixel driver (OFPD) is compared with previously published OFPDs and its advatanges are pointed out and discussed. A testing scheme of an optical feedback pixel driver is proposed, discussed and simulated by HSPICE. A basic characteristic of the specific circuit is that the gray scales of the pixel are created by pulse width modulation. So, the integral of the output Ipixel current (which is proportional to Ioled) has to be measured or calculated and used for testing. The testing procedure that is proposed enables the detection and identification of common processing defects up to 96%, as verified from simulation results. Although Ipixel current is tend to be very low, the measuring system used, using special instrumentation ICs, is successfully simulated and verified by HSPICE. Pentacene and PTCDI-C13 have been used as organic semiconductors for the fabrication of p- and n-type organic thin-film transistors (OTFTs). Both types of semiconductors are wellestablished and demonstrate good performance in devices separately, but few competitive results have been reported in complementary designs. In this manuscript, we show the fabrication, electrical characterization and simulation of an organic complementary inverter using pentacene and PTCDI-C13 as active semiconductors. Simulation was done using a model with physical aspects. We report good fitting of p-type and n-type parameters for the OTFT model and good results for DC transfer characteristics of the organic complementary inverter. The fitting of the parameters of the OTFT model is performed using an optimized parameter extraction technique which is using fuzzy logic to adjust the parameters to its optimal value.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2010
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Papadopoulos, Nikolaos
- Παπαδόπουλος, Νικόλαος
Subjects
dc:subject × 17- Τρανζίστορ λεπτών υμενίων
- Κύκλωμα οδήγησης εικονοστοιχείου
- Πολυκρυσταλλικά
- Οργανικά
- Φωτοδίοδος
- Επίδραση φωτός
- Ανίχνευση βλαβών
- Thin film transistors
- Pixel driver
- Polycrystalline
- Organic
- Oled
- Testing
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Engineering and Technology
- Electrical Engineering, Electronic Engineering, Information Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/23598