Back to search

Aristotle University Of Thessaloniki (AUTH)

Διερεύνηση της αριθμητικής προσομοίωσης τοιχοπληρωμένων πλαισιακών φορέων Ο/Σ υπό σεισμικού τύπου φορτίσεις

Abstract

dc:description

The interaction between masonry infills and the surrounding R/C frames when they are subjected to seismic type loading is the objective of this thesis. The present study is divided in two parts. The first part focuses on the development of 2-D nonlinear finite element models for the numerical simulation of infilled masonry panels. These models were validated by comparing the numerical results with experimental measurements. For simulating numerically the behaviour of unreinforced masonry the validation was based on the following: a) Numerical simulation of mortar joint under combined horizontal and compressive loading. b) Νumerical simulation of diagonal tension test. c) Νumerical simulation of racking tests on masonry piers. Based on the above, the numerical simulations with the best performance were next applied for simulating the observed behaviour of single-story one-bay R/C infilled frames that were subjected to combined horizontal cyclic loads together with vertical forces. The experimental results were obtained through extensive laboratory investigation that was carried out at Aristotle University (Thauampta 2008). The proposed numerical simulations were successful in predicting the observed behaviour. It was shown that the mechanical behaviour of the interface between the masonry infill and the surrounding R/C frame can exercise significant influence on the stress state and failure mechanism that develops in the masonry infill. In the second part, the in-plane seismic response of multistorey buildings is studied including the influence of masonry infills. Initially, one of the proposed nonlinear models is used to simulate successfully the behaviour of a plane, 3-storey R/C frame. Next, a push over analysis was performed for a plane 6-storey infilled RC building. Finally, a push over analysis on a 3-D, 6-storey, R/C masonry infilled structure was attempted without success due to very large computational demand. In order to overcome this difficulty a new methodology is proposed and validated, aiming to incorporate the change of stiffness of infills that are positioned within the R/C frames of a 3-D multi-storey building. In this elastic analysis the masonry infills are modelled as elastic diagonal struts with stiffness properties found from a complete inelastic analysis of a series of corresponding single-storey, one-bay infilled frames. The seismic response of a six-storey infilled RC building is successfully examined in this case.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Soulis, Vassilios
  • Σούλης, Βασίλειος

Subjects

dc:subject × 19

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/23778

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Soulis, Vassilios; Σούλης, Βασίλειος. Διερεύνηση της αριθμητικής προσομοίωσης τοιχοπληρωμένων πλαισιακών φορέων Ο/Σ υπό σεισμικού τύπου φορτίσεις. Aristotle University Of Thessaloniki (AUTH), 2009. http://hdl.handle.net/10442/hedi/23778