Back to search

Democritus University of Thrace (DUTH)

Βελτιστοποίηση σχεδιασμού, παραγωγής και χρήσης μειγμάτων αυτοσυμπυκνούμενου σκυροδέματος σε βιομηχανική κλίμακα στην Ελλάδα

Abstract

dc:description

Specific concrete types which demand little to slight vibration after the completion of casting procedure, were used in Europe since the early 70’s. Self Compacting Concrete developed eventually in the late 80’s in Japan and was later on introduced to several European countries in the middle 90’s. The term self compacting concrete (SCC) is referred to a new, special type of concrete, which is based on the emerging technology of adequate rheology and high segregation resistance. SCC differs from the traditional concrete by the increased hydraulic/pozzolanic materials and the incorporation of chemical admixtures such as superplasticiser, retarding admixture, high range water reducer and viscosity modifying agent. The alterations that are presented in the SCC mixture proportions lead to high fluidity and the ability to cast highly reinforced structures and specially shaped formworks with optimum outcome. Further benefits that come along when using SCC are: labor reduction, shortening of placing and finishing time, total absence of vibration equipment and elimination of the hazardous noise. These distinctive characteristics make the use of SCC a profitable investment compared to traditional concrete and conventional techniques. Nevertheless the use of SCC, as far as the Greek field of concrete technology is concerned, has not met great acceptance yet due to difficulties which have mostly to do with the production procedure. The latter concerns the minimum tolerance that is presented by SCC to material fluctuations and weighting errors which take place on site. This is of great importance as this type of conduct leads to alteration of rheological characteristics of the freshly mixed concrete and the hardened concrete attributes afterwards. To cope with the above stated concerns, the development of a new methodology for the production and control of fresh SCC mixtures is analytically described in the present doctoral thesis. According to the methodology proposed, concrete mixtures are firstly designed in mortars which are evaluated before the corresponding concrete mixture production takes place. The methodology presents great flexibility considering its application and differentiates itself compared to other proposed methodologies as it permits the production of concrete mixtures which belong to lower strength classes. In that way the use of SCC can be a potential solution for casting everyday structures, answering the demands of the modern construction industry. The next stage of the doctoral thesis was centered to the production of two different groups of SCC mixtures with sufficient degree of confidence. The concrete groups differed from each other by their basic constituents and in particular the type and number of chemical admixtures and the origin of the used sand. The mixture proportions were consequently altered and the two mixture groups exhibited entirely different rheological characteristics which nevertheless presented acceptable attributes. During the present phase all concrete mixtures were thoroughly tested in terms of fresh concrete behavior using laboratory equipment. Later on large scale experiments took place in a factory (ΤΕΚΤΩΝ Α.Ε.) nearby Xanthi’s region. That specific survey concluded to the enactment of a series of methodologies concerning the retention of concrete’s workability where needed and the successful transfer of the SCC mixture on site. That is extremely important as any slight deviation of the mixture’s workability compared to the designed one, leads to different rheological behavior and sets the economic and time budgeting base in jeopardy. The efforts of the studies were then focused on the development of the pressure distribution on vertical structure elements. SCC is as it is already said an extremely fluid material which approaches the concrete hydrostatic pressure during casting procedure and under certain circumstances it may even exceed it. That is mainly referred to vertical elements as the hydrostatic pressure is only dominated by the parameter of height. The phenomenon was studied by casting laboratory and large scale columns using special recording equipment of pressure development at different heights of the columns at all times. The outcome of that part of the study exhibits peculiar SCC behavior which in some aspects (SCC mixture rheology, different casting rates, and reinforcement percentage) is different compared to relevant literature references. The experiments described in the previous paragraphs were ideally fulfilled by the conduct of specimen extraction which were drilled off large scale columns. Cores were extracted from all sixteen large scale columns and laboratory columns to assess hardened concrete characteristics. Corresponding tests took place in the laboratory using control specimens for the assessment of the mechanical characteristics and durability of all designed mixtures. The results from the extracted cores comply well with previous conclusions which were stated in the present doctoral thesis giving a vivid description about the overall hardened behavior of the SCC mixtures studied in terms of strength class, rheology and casting rate. The epilogue of the survey and the present doctoral thesis was drawn by the incorporation of the optimum SCC mixes for two different strength classes (SCC 25/30 και SCC 30/37) to a ready mix plant (ΤΕΚΤΩΝ Α.Ε.). The specific SCC mixes were used in repair works of vertical structural elements in Xanthi’s andKavala’s region respectively. The successful outcome of the enterprises described above certifies the advancement of concrete technology in Greece in terms of SCC application and lays the ground for future replacement of traditional concrete by self-compacting concrete.

Degree

thesis:*
Grantor dc:publisher
Democritus University of Thrace (DUTH)
Year dc:date
2010

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Georgiadis, Aggelos
  • Γεωργιάδης, Άγγελος

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/23955

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Georgiadis, Aggelos; Γεωργιάδης, Άγγελος. Βελτιστοποίηση σχεδιασμού, παραγωγής και χρήσης μειγμάτων αυτοσυμπυκνούμενου σκυροδέματος σε βιομηχανική κλίμακα στην Ελλάδα. Democritus University of Thrace (DUTH), 2010. http://hdl.handle.net/10442/hedi/23955