Back to search

University of Ioannina

Ανάπτυξη νανοκρυσταλλικών επικαλύψεων με τεχνικές θερμικού ψεκασμού

Abstract

dc:description

The aim of the present doctorate thesis is to dissert the manner of successfully depositing nanostructured coatings during spraying, with a high temperature flame, of powder feedstocks of initially nanostructured materials. Nanostructured ceramic and metal powder feedstocks have been sprayed by two different spraying processes in order to study the interaction of the powder particles with the flame, and consequently their melting degree, with varying spraying parameters. The intention is to deposit coatings, which will be consisted of well melted particles, in order to show good cohesive and adhesive properties, but on the other side, unmelted enough in order to maintain their initial nanostructure. The achievement of the ideal combination is expected to deposit coatings of improved properties. The coatings deposited by the nanostructured ceramic powder exhibited higher hardness values and wear resistance, however they lacked in adhesive properties compared to the conventional coatings. The application of a sintering stage, a first for this nanostructured powder, allowed to confront this inferior behaviour and to produce coatings of improved properties. More specifically the coatings, produced by sintered powder, exhibited 30 % higher adhesion values, 50 % higher fracture toughness and approximately threefold wear resistance compared to the conventional coatings. The properties of the nanostructured coatings, which were deposited by the nanostructured metal powder, were influenced both by the spraying process and the spraying parameters. HVOF spraying and a sub-stoichiometric oxygen-fuel ratio prevented extensive oxidation of the powder particles during spraying and simultaneously contributed to the retention of the initial nanostructure. These two properties seemed to affect the coatings behaviour in wear resistance and high temperature oxidation resistance. In parallel, a semi-crystalline alloy powder was sprayed in order to produce fully amorphous coatings. Amorphous alloys coatings are innovative materials which exhibit a simultaneous combination of improved properties. The spraying parameters under which the maximum amorphous content would be obtained in the coatings were studied, as well as their affection on the rest of the coatings’ properties. The stoichiometric oxygen-fuel ratio produced coatings which were superior in amorphous content, porosity, fracture toughness and wear resistance compared to the other produced coatings. Furthermore, the crystallization sequence was studied during the exposure of the amorphous coatings, and semi-crystalline powder, to high and very high temperatures. The powder and coatings showed signs of crystallization in temperatures over 600 oC, which evidenced their high resistance to crystallization. Moreover, all the deposited coatings presented high resistance to corrosion, general and mainly local, in different electrolytes. Their corrosion resistance seemed to deteriorate as their amorphous content was reduced, confirming the significant role of the amorphous structure presence in corrosion resistance.

Degree

thesis:*
Grantor dc:publisher
University of Ioannina
Year dc:date
2010

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Zois, Dimitrios
  • Ζώης, Δημήτριος

Subjects

dc:subject × 18

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/24464

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Zois, Dimitrios; Ζώης, Δημήτριος. Ανάπτυξη νανοκρυσταλλικών επικαλύψεων με τεχνικές θερμικού ψεκασμού. University of Ioannina, 2010. http://hdl.handle.net/10442/hedi/24464