Back to search

National Technical University of Athens (NTUA)

Detailed three - dimensional nonlinear hybrid simulation for the analysis of large - scale reinforced concrete structures

Abstract

dc:description

Modeling of RC structures with beam-column type finite elements was proven to be insufficient and inaccurate, especially when dealing with shear dominated structural members and structures with complex geometries. Nevertheless, this type of finite element is used widely for the analysis and design of RC structures due to its computational efficiency which is attributed to the resulting reduced-size numerical finite element models. Based on these limitations, an extensive literature survey was conducted, with the intention to allocate the most promising beam-column FE formulation for modeling RC structures. It was concluded that one of the most numerically advanced beam FE type was the Natural Beam-Column Flexibility-Based (NBCFB) element, which was incorporated in ReConAn software code following an extensive parametric investigation regarding its nonlinear numerical behavior. The second objective of this Dissertation was the literature investigation of 2D and 3D nonlinear modeling methods for RC structures with the purpose of acquiring a general idea about the trends on more sophisticated FE models. Furthermore, the selection of the numerically most promising 3D modeling method was a primary objective, in order to develop a sophisticated software tool capable of predicting the nonlinear response of full-scale RC structures in an acceptable computational time. After this literature review, it was concluded that the existing three-dimensional modeling techniques exhibit a number of limitations for capturing the nonlinear behavior of RC structures and that the corresponding software with sophisticated models for the simulation of nonlinear phenomena, such as cracking and detailed rebar modeling, are very sparse. This is attributed to the numerical restrictions and difficulties described above, whereas the required CPU resources become excessive when dealing with such numerical models even for the case of small-scale FE models. It is well known that the analysis of multistory RC buildings is performed through the use of beam-column elements which allow fast simulation times without serious numerical instabilities. In order to be able to analyze this type of structures with three-dimensional constitutive material models incorporated into 3D finite elements and the use of standard CPU systems, the availability of a powerful software tool is not enough. This constraint derives from the fact that CPU processors are bounded from an upper limit which is determined from the hardware itself. Processing power was not and will never be enough since the demand for the solution of larger numerical models constantly increases. In general, this is attributed to the necessity of large-scale simulations with detailed models for the purpose of capturing, as realistically as possible, the nonlinear behavior of structural systems. Therefore, the third objective of this Dissertation was to determine numerical techniques which will overcome these limitations when dealing with full-scale RC structures. A well-known approach that is used widely in computational mechanics is the use of parallel solvers which in this case will become a subject of future work. A second approach for overcoming this numerical restriction is to use models which combine different types of FE models and which will be called “hybrid models”. This type of modeling assumes that shear dominated structural members with an expected highly nonlinear behavior are modeled with 3D detailed finite elements and the rest of the structure is modeled with simpler beam-column finite elements. This technique leads to a reduction in the complexity of the model and of the required computational demand for the solution of the discretized model, retaining at the same time an acceptable accuracy during the analysis procedure. Finally, the last objective of this research work, was the development of an object-oriented FEA code, capable of easily incorporating advanced numerical techniques and modeling methods for the analysis of RC structures. In addition, it will have the ability to incorporate easily future work and simulation enhancements, which will result into a more general FEA code that will provide the ability of realistic and reliable predictions of the nonlinear response of any type of structure. For the purpose of developing an extendable and sustainable program code, modern programming techniques are used and new numerical methods are developed to create the necessary program structure which will incorporate these state of-the-art features. It is the author’s personal opinion that this task is of great importance, especially when dealing with the solution of computationally complex numerical problems.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2011

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Markou, Georgios
  • Μάρκου, Γεώργιος

Subjects

dc:subject × 16

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/24471

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Markou, Georgios; Μάρκου, Γεώργιος. Detailed three - dimensional nonlinear hybrid simulation for the analysis of large - scale reinforced concrete structures. National Technical University of Athens (NTUA), 2011. http://hdl.handle.net/10442/hedi/24471