University of Thessaly (UTH)
Simulation of transport phenomena in conditions far from thermodynamic equilibrium via kinetic theory with applications in vacuum technology and MEMS
Abstract
dc:descriptionNon equilibrium transport phenomena are examined via the kinetic theory of gases. In low pressure/dimensionality systems the particulate nature of the gas must be taken into account, greatly increasing the computational effort. The distribution of particles in time physical and molecular velocity space is described by the Boltzmann equation or an appropriate kinetic model. The Discrete Velocity Method (DVM) and the Direct Simulation Monte Carlo (DSMC) are applied here in the whole range of the Knudsen number. The interaction of gases with solid surfaces is considered by the Cercignani-Lampis boundary conditions. Their non linear form is applied on heat transfer problems for the first time while the linearized form is employed for flow and heat transfer problems. A comparison with relevant experiments leads to surface characterization. Non-linear heat conduction is studied for a wide range of temperature differences by the Shakhov kinetic model. Results on heat flux, temperature and density are presented and non-equilibrium phenomena, such as non-uniform pressure distribution, are discussed. An advanced discrete velocity scheme is developed for linear and non linear problems. Memory and CPU requirements are significantly reduced and the algorithm allows the simulation of demanding problems. As a benchmark it is applied on non-linear flow through short tubes using three kinetic models and the DVMA comparison with DSMC for a wide range of parameters leads to solid remarks about the effectiveness of the algorithm. In this problem, a new boundary condition model is developed and applied for adiabatic walls. The range of validity for linearized kinetic equations is studied by comparing with corresponding non-linear results. It is found that linearized results can be applied well beyond their theoretical limits with sufficient accuracy and if combined with the DSMC method all possible conditions can be covered Linearized flow through orifices and short tubes due to small pressure differences is studied for the first time. The zero length case is very important for benchmarking purposes while the DSMC faces significant difficulties in this case. Finally the channel end effect is investigated for the rectangular channels with large aspect ratios and cylindrical tubes. The well known fully developed flow analysis is extended by a novel methodology greatly reducing the computational effort and improving the accuracy.
Degree
thesis:*- Grantor dc:publisher
- University of Thessaly (UTH)
- Year dc:date
- 2011
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Pantazis, Sarantis
- Πανταζής, Σαράντης
Subjects
dc:subject × 29- Αριθμός Knudsen
- Αραιοποιημένες ροές
- Κινητική θεωρία
- Τεχνολογία κενού
- Μικροηλεκτρομηχανολογικά συστήματα
- Μέθοδος διακριτών ταχυτήτων
- Μέθοδος απευθείας προσομοίωσης Μόντε Κάρλο
- Επιτάχυνση Wynn-ε
- Κανόνας Romberg
- Μη γραμμικές ροές
- Πυρήνας σκέδασης
- Knudsen number
- Rarefied flows
- Kinetic theroy
- Vacuum technology
- MEMS
- Discrete velocity method
- Direct simulation Monte Carlo
- Wynn-ε acceleration
- Romberg rule
- Grid refinement
- Non-linear phenomena
- Non-equilibrium phenomena
- Scattering kernel
- Cercignani-Lampis
- Φυσικές Επιστήμες
- Φυσική
- Natural Sciences
- Physical Sciences
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/24649