University of Ioannina
Ανάπτυξη και χαρακτηρισμός ασύμμετρων πολυμερικών μεμβρανών, για τον διαχωρισμό συστατικών του φυσικού αερίου
Abstract
dc:descriptionIn this research the first experiments concern the performance of various polymers in permeability and gas separation procedures. The study is based on dense membranes, which are considered as the most appropriate products, for the correlation of the obtained experimental data with the materials’ native preferences. The materials that are used here are polymethyl-methcrylate, polysulfone, cellulose acetate and polyethylene, in various molecular weights. In the permeability experiments, the gases that are used are N2,CH4 ,H2S and their mixtures. The gases and experimental conditions (temperature for example) are selected in an attempt to simulate the substances of natural gas or other simple hydrocarbons, in ordinary membrane applications. The next part of the project, incorporates the study of a variety of aspects of the membrane casting (such as membrane shrinkage). Other technological procedures concerning gas separation with the use of polymeric membranes (such as membrane surface repair or annealing) are also investigated for their effect on the membrane’s structure and as of that to the membrane’s performance. The following section of the research, involves the study of simple porous fibers, which are considered as the dynamic aspect of the membranes. In this case the significant parameter of the fibers’ extension and its effect on the micro-morphology of the product, is studied. The structural details of interest are: finger like pores, the pores’ geometry and their size distribution. The fibers are casted from PMMA and Psf in various MW. Finally hollow fibers are studied. This category of fibers is interesting from technological point of view, taking into consideration their large permeating surface versus their small weight and volume, when they are used in procedures such as gas separation or similar. Yet the hollow fiber casting process, being quite similar with the case of simple fibers, is a field of research that the results of the previous experiments can be put into practice. Again the microstructure that is created under stresses during the fiber casting and the product quality, is the point of interest. PMMA and Psf, combined with various solvents are checked.
Degree
thesis:*- Grantor dc:publisher
- University of Ioannina
- Year dc:date
- 2010
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Karadimos, Georgios
- Καραδήμος, Γεώργιος
Subjects
dc:subject × 12Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/25112