National and Kapodistrian University of Athens
Μελέτη πολυμερικών και ανθρακοποιημένων κοίλων ινών σε διαχωρισμούς αερίων
Abstract
dc:descriptionThe main topics discussed in this thesis are the preparation and charactenzation of carbon hollow fiber membranes from a polymer polyimide precursor. The pore structure characterization of these microporous membranes and the investigation of diffusion and selectivity mechanisms in microporous solids were the main priorities of this dissertation. Emphasis was given to the preparation of the hollow fiber membranes which can be used in gas separation. Polymeric BTDA TDI/MDI (P84) co polyimide hollow fiber membranes were prepared using the dry/wet spinning technique which is based on a phase inversion method. An approximation of both nucleation and growth and spinodal decomposition mechanisms were studied these are presented graphically. The produced polymeric and also carbon hollow fiber membranes were studied using single phase permeability and mixture selectivity techniques in various gases and mixture gases respectively. Electron microscopy pictures provide information about the macroscopic structure of the samples. Static (adsorption SAXS, SEM) and dynamic (permeability) techniques were used to characterize the membranes as well as a combination (relative permeability adsorption in conjunction with SAXS) of them. Combining techniques such as adsorption with SAXS and relative permeability gives more important information about pore structure surface properties and pore adsorption process. Three carbon hollow fiber membranes were produced via three different pyrolysis procedures membrane 2 (M2) was pyrolysed under N₂, M1 and M3 membranes were pyrolysed under Ar. In a case of the M3 membrane after the isothermal residences took place an activation process using CO₂ stream. Regarding the results of testing the permeability of M1 and M3 samples was found to be greater than that of membrane M2. The diffusion mechanism for M1 and M3 is Knudsen diffusion which molecular sieving occurs in the M2 sample. Therefore the ideal gas separation coefficient for H₂/CH₄, was approximately 2.2 for M1 and M3 membranes and 845 for M2. Important information on the microporous network was obtained using high pressure gas adsorption experiments. In particular H₂ CO₂ N₂ and CH₄ adsorption experiments were used to estimate the classification of micropore size M1 was found to be the most ultra microporous of the materials followed by M3 and finally M2. These conclusions were made following in situ adsorption/SAXS experiments and also Grand Canonical Monte Carlo simulations.
Degree
thesis:*- Grantor dc:publisher
- National and Kapodistrian University of Athens
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Favvas, E.
- Φάββας, Ευάγγελος
Subjects
dc:subject × 22- Πολυμερικές κοίλες ίνες και κοίλες ίνες άνθρακα
- Μικροπορώδεις μεμβράνες άνθρακα
- Διαχωρισμός αερίων
- Διαπερατότητα αερίων
- Εκλεκτικότητα αερίων
- Χαρακτηρισμός πορώδους δομής
- Σκέδαση ακτίνων-Χ σε μικρές γωνίες
- Προηγμένες μέθοδοι χαρακτηρισμού πορώδων υλικών
- Μοριακή προσομοίωση
- Polymeric hollow fiber and carbon hollow fiber membranes
- Microporous carbon membranes
- Gas separation
- Gas permeability
- Gas selectivity
- Pore structure characterisation
- Small angle X-ray scattering
- Advance methods for porous materials characterisation
- Molecular simulation
- Φυσικές Επιστήμες
- Χημεία
- Natural Sciences
- Chemical Sciences
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/25350