Aristotle University Of Thessaloniki (AUTH)
Προσδιορισμός συμπεριφοράς PVD επικαλύψεων επί κοπτικών εργαλείων σε επαναλαμβανόμενη κρούση με διάφορα φορτία και θερμοκρασίες
Abstract
dc:descriptionCoatings on cutting tools experience high mechanical and thermal loadings, especially at high cutting speeds. The investigation of the acting phenomena under such cutting conditions is of crucial importance towards explaining the coating failure and wear propagation. Recent improvements of the impact test rendered feasible the conduct of investigations at elevated temperatures. Many PVD films monolayers and a multilayer, with different micro and macro structures, were applied. The coatings’ strength properties were detected by nanoindentations and by impact tests at various temperatures. These results were considered in FEM calculations of the material removal process to determine the mechanical and thermal loadings of the cutting wedge. Finally, a correlation of the milling performance at various cutting speeds with the coating impact behavior at high temperatures was established. The presented results render the impact test at elevated temperatures, as a very efficient method for detecting coating resistance for the synchronous contribution of fatigue and thermal phenomena to the film fracture and wear. A need to examine what precisely happens at the test of repeated impact procedure was created due to various factors superseding during the procedure. Specifically the offer of mechanical energy and the restricted area of contact are responsible for the coating failure. The results were very exciting as they showed differences in the hardness of the imprint. The center proved to be harder than the periphery of the imprint. The applied impact loads were 30, 60 and 90 daN and the number of impacts was set to 105 and 106. The results were the same in all cases. Additionally it was found that increasing the load force the differentiation of prices of depth penetration which is translated as hardness, grows higher for the same always number of impacts. Βy a FEM supported simulation of the nanoindentations, the coating’s load-displacement behaviour in various areas of the impact imprint were predicted and the effective coating mechanical properties as well. Furthermore the tension fields derived from the stimulation confirm that the covering is not charged plastic but remained in the flexible region. On the contrary the sub layer is charged and as it charged with forces, drifts the coating in the centre of the imprint with compression forces while in the periphery tension forces occurred. Finally those different forces result the coating failure. Until now the experiments were taken place at room temperature. The innovation in the particular thesis is the need to investigate the coatings behaviour in higher temperature for a different number of loads. So occurs the opportunity to correlate the results of cutting in various speeds thus different temperature leading to the investigation of the wear mechanism. Additionally, the results of impact test compared with the real results from cuttings gave exactly similar behaviour.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2010
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Lili, Eleftheria
- Λίλη, Ελευθερία
Subjects
dc:subject × 14- Σκληρομέταλλα
- Μέθοδος φυσικής εναπόθεσης ατμών ( PVD)
- Μικροκοκκοβολή
- Αλγόριθμος Sscuboni
- Κρούση, Δοκιμαστήριο επαναλαμβανόμενης
- Νανοσκληρομέτρηση
- Hardness of coating
- Coatings
- Elevated temperatures
- Impact tester
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Engineering and Technology
- Mechanical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/25473