Aristotle University Of Thessaloniki (AUTH)
Μελέτη της μοριακής αποτύπωσης πολυμερών για αναλυτικές εφαρμογές
Abstract
dc:descriptionThe aim of the present study is the development of molecularly imprinted micro- and nanoparticles for the selective recognition and separation of drugs (e.g., theophylline), biomolecules (e.g., amino acid derivatives and oligo-homo-peptides) and pesticides (e.g., triazines). All of the selected template molecules possess functional groups able to form non-covalent interactions with the functional monomers, while their physical properties and especially their solubility promote their successful handling as template molecules during the synthesis procedure. For the synthesis of the molecularly imprinted micro- and nanoparticles (MIPs) three different polymerization techniques, including precipitation, suspension and miniemulsion polymerization, were utilized. Initially, the effect of the various process parameters (e.g., type of functional monomer, cross-linker, porogen, stabilizer, etc) on the particle size distribution and the particle morphology of the produced polymers was studied aiming to the synthesis of molecularly imprinted polymeric nano- and microparticles combining optimized physical properties (size, porosity, etc) and high selectivity towards the template molecule. In all cases, the produced MIP particles are characterized by high surface area either due to their small size or due to their high porosity. In particular, the mean particle size of the polymeric particles produced by precipitation polymerization varies from 0.25 to 4μm, depending on the functional monomer, the cross-linker and the solvent type. The particles produced by miniemulsion polymerization appear a mean diameter equal to approximately 100nm and, consequently, a high specific surface area (i.e., 50m²/g). In case of suspension polymerization, polymeric microparticles with a mean particle size in the range of 90 to 150μm and a significantly high specific surface area (up to 450m²/g) were produced due to the presence of a porogen into the monomer phase. In all cases, the resulted molecularly imprinted nano- and microparticles are characterized by a high rebinding capacity towards the template molecule mainly due to their high specific surface area. Apart from the control of the physical properties of MIPs, an extra effort has been placed on the synthesis of molecularly imprinted polymers towards biomolecules and more specifically oligo-homo-peptides, such as the tripeptide of tryptophan, through precipitation and suspension polymerization. In case of precipitation polymerization, molecularly imprinted particles with a mean particle size approximately 1μm were produced, while suspension polymerization resulted in the formation of microparticles with a mean particle size approximately 100μm. Due to the limited availability of the specific peptide, the synthesis of MIPs was initially studied towards the corresponding amino acid (i.e., tryptophan). Then, the synthesis protocol was adapted to the synthesis of MIPs towards the peptide and it was found that MIPs adsorbed more peptide than NIPs. Moreover, a comparative analysis was performed and it was shown that MIPs’ binding towards the template molecule was higher than the binding towards other tripeptides. Additionally, MIPs produced by precipitation polymerization were incorporated into poly(vinyl alcohol) and alginate beads and, also, into hybrid ceramic filters. The main target was the development of composite materials that could be used in analytical applications for the packing of HPLC and SPE columns and moreover in separation processes (i.e., removal of polluting agents from water), since it is well known that particles with size smaller than 5μm can lead to extremely high pressure drop that hinder the operation of such continuous processes. More specifically, it was proved that in case of the composite alginate beads the impregnated MIPs preserve their selectivity and, thus, enable their use in analytical applications. On the contrary, the morphology of the composite poly(vinyl alcohol) beads restrains the binding properties of the impregnated MIPs, while the binding efficiency of the hybrid ceramic filters is reduced promptly, thus proving the necessity of further experimental study. Finally, the MIP microparticles produced by suspension polymerization were utilized as packing material in HPLC columns and the results showed that the use of polymers with a wider particle size distribution can lead to better resolution due to the longer retention time of the analyte.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2008
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Kotrotsiou, Olympia
- Κοτρώτσιου, Ολυμπία
Subjects
dc:subject × 22- Μοριακή αποτύπωση
- Πολυμερικά μικροσωματίδια
- Πολυμερικά νανοσωματίδια
- Αναλυτικές μέθοδοι
- Πολυμερισμός καθίζησης
- Πολυμερισμός αιωρήματος
- Πολυμερισμός μινι-γαλακτώματος
- Βιομόρια
- Παρασιτοκτόνα
- Molecular imprinting
- Polymeric microparticles
- Polymeric nanoparticles
- Analytical methods
- Precipitation polymerization
- Suspension polymerization
- Miniemulsion polymerization
- Biomolecules
- Pesticides
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/25483