National Technical University of Athens (NTUA)
Φωτοκαταλυτική οξείδωση πτητικών οργανικών ενώσεων σε απαέρια βιομηχανικών εγκαταστάσεων
Abstract
dc:descriptionThe present PhD thesis aimed at investigating the treatment of industrial flue gases, coming from facilities for the production of paints that contain Volatile Organic Compounds (VOCs), using the process of Photocatalytic Oxidation (PCO). Specifically, the effects of the type of pollutant, catalyst, residence time and water vapor presence on the PCO process were studied. PCO is an alternative method of treating gaseous pollutants, which's the most important advantage, is the mild operating conditions. The compounds selected in the present study were: benzene, toluene, ethyl benzene and m-xylene (BTEX). Although benzene was not detected in the flue gases, it was included in the study on reasons of plenitude. A TiO2 photocatalyst was prepared (TiO2-isopropoxide) and was used to cover the walls of the reactor. The experiments were conducted with a low pressure mercury lamp (λ = 254 nm, UV-C) as source of UV irradiation. The reactor operated in the CSTR mode by means of a recycle pump. Gas chromatography (GC-FID, GC-MS) was used for the analysis of the outlet of the reactor. Firstly, the photocatalytic oxidation of acetone was examined. The addition of humidity in the system resulted in a decrease in the oxidation rate of acetone. LHHW type rate expressions were used to interpret the experimental data. The next step was to study the photocatalytic oxidation of the following aromatic compounds: benzene, toluene, ethyl benzene and m-xylene (BTEX) with TiO2-isopropoxide as catalyst. The conversions achieved for all compounds were above 70%. It was found that their oxidation rate increased with the following order: benzene < toluene < ethyl benzene < m-xylene. The addition of water vapor in the system led to a great increase in the oxidation rate of all compounds studied with the exception of m-xylene. LHHW type kinetic models proved to be efficient in describing the experimental results. Finally, the oxidation of BTEX was studied over the following modified catalysts: 1) TiO2-P25, 2) TiO2-Pt, 3) TiO2-Fe, 3) TiO2-Ce. All catalysts prepared starting from TiO2-P25, with the method of wet impregnation. All catalysts were more efficient than TiO2-isopropoxide. Regarding the specific compounds, the highest oxidation rate was achieved as follows: benzene: TiO2-Ce, toluene: TiO2-P25, ethyl benzene: TiO2-Ce, m-xylene: TiO2-Pt. In general, for all catalysts tested, the oxidation rate increased with the order: TiO2-isopropoxide < TiO2-Fe < TiO2-P25 < TiO2-Pt < TiO2-Ce.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2011
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Korologos, Christos
- Κορολόγος, Χρίστος
Subjects
dc:subject × 20- Φωτοκαταλυτική οξείδωση
- Πτητικές οργανικές ενώσεις
- Βιομηχανικά απαέρια
- Φωτοκαταλύτες
- Διοξείδιο τιτανίου
- Επίδραση υγρασίας
- Τροποποιημένοι καταλύτες
- Κινητική μελέτη
- Photocatalytic oxidation
- Volatile organic compounds
- Industrial flue gases
- Photocatalysts
- Titanium dioxide
- Effect of humidity
- Doped catalysts
- Kinetic study
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/25519