Back to search

National Technical University of Athens (NTUA)

Ανάπτυξη ηλεκτρολυτών για οργανικές ηλιακές κυψελίδες

Abstract

dc:description

This PhD thesis was centered on the development and investigation of the redox electrolyte, one of the basic components of a dye-sensitized solar cell. Initially, a liquid electrolyte with inorganic iodide salts and redox couple of the form ΧI/I2 was optimised. It has been confirmed that the photocurrent and the overall efficiency of the cell increase with the increase of the lithium iodide concentration in the electrolyte, the value of 0.8M being considered as the optimum concentration for the salt LiI. The addition of tetrabutylammonium iodide resulted in a more efficient electrolyte, the concentration ratio (of the Li+/ TBA+ ions) of 3:2 being the most promising. It was observed that an increase of the iodine Ι2 concentration leads to a decrease of photocurrent and 0.02M was considered as the optimum value. The addition of 0.2M tert-butylpyridine TBP or 0.45M NMBI improved noticeably the efficiency of the electrolyte by increasing the photovoltage of the cells. Methoxypropionitrile MPN, when used as a solvent with inorganic iodide salts, produced stable electrolytes. However, the highest efficiency (η= 5.1%), was obtained when propylene carbonate PC was used as a solvent (in cell with composite TiO2 film electrodes). In parallel, ionic liquid electrolytes were investigated, using 1-propyl-3-methyl-imidazolium iodide as salt in the redox couple (ΡΜΙΙ/ Ι2). Guanidinium thiocyanate GuSCN was added to the best electrolytes of this sub-project: PC-PMII 0.8M- I2 0.02M- TBP and PC-PMII 0.8M- I2 0.08M- ΝΜΒΙ. In both cases, the additive proved to have beneficial role in the electrolyte, notably by increasing the photocurrent. Thus, in cells with composite TiO2 film electrodes and electrolyte containing TBP, the efficiency reached value as high as η=8.03%. In addition, liquid electrolytes of the type: PC-PMII - I2 - TBP were solidified by addition of polyethylenoxide PEO. It is worth mentioning that the cells stability increased remarkably, while their efficiency barely decreased (from η=4.14% to 4.01%). Partial substitution of ionic liquid by cesium iodide was made and the electrolyte PC-PEO-TBP-PMII/CsI/I2 was used to construct quite efficient and remarkably stable cells (η= 5.80% with composite TiO2 films). In that case, the incorporation of TiO2 nanotubes further increased the efficiency of the composite electrolyte (η=7.72 %). Liquid electrolytes ΑCN-LiI-I2 were solidified and then composite electrolytes were developed by the addition of inorganic oxides TiO2, MgO, Al2O3, SnO2 and their mixtures. The filler addition decreased the crystallinity (MDSC measurements), increased the conductivity (EIS measurements) and enhanced the efficiency of the cells (I-V measurements), especially in the case of TiO2. Polymer electrolytes of the form: PEO- LiI- I2 were also prepared, plasticized with propylene carbonate and characterized with Modulated Differntial Scaning Calorimetry (MDSC). It appears that plasticization up to a point decreases the crystallinity of polymer matrix and therefore makes it more conductive. Similar conclusions were extracted as far as the incorporation of filler in plasticized electrolytes is concerned. Finally, the most efficient liquid electrolytes of this project were solidified by addition of polymers: polyvinylacetate (PVAc), mixtures of PVAc and PEO, poly(vinylidene-fluoride-co-hexafluoropropylene) (PVdF-HFP), and polyvinylalcohol (PVA). It is noteworthy promising that using PVdF-HFP, the stability increased and the efficiency of the dye-sensitized solar cells (η= 4.38%) almost remained practically unchanged, with respect to the corresponding efficiency with liquid electrolytes ( η= 4.71%) .

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Ρόζη, Ευαγγελία
  • Rozi, Evangelia

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/25594

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Ρόζη, Ευαγγελία; Rozi, Evangelia. Ανάπτυξη ηλεκτρολυτών για οργανικές ηλιακές κυψελίδες. National Technical University of Athens (NTUA), 2009. http://hdl.handle.net/10442/hedi/25594