University of Thessaly (UTH)
Μελέτη και χαρακτηρισμός ηλεκτρολυτικών υλικών για χρήση σε ηλεκτροχημικά στοιχεία καυσίμου τύπου χαμηλής θερμοκρασίας με απευθείας τροφοδοσία αιθανόλης
Abstract
dc:descriptionThe direct ethanol fuel cell technology is the subject of extensive research aiming at the practical realization of small scale power generating mobile and stationary applications. Obstalces related to the electrocatalytic and electrolytic materials used currently limit the practical application and commercialization of the technology in its current state, for both cases of methanol and ethanol as fuel. Concerning the electrocatalysis of the alcohols, the known catalysts used for hydrogen electrocatalysis are insufficient for the electrooxidation of ethanol and methanol, at least not at the usual operating conditions of low temperature fuel cells. However, one of the main problems that occur when liquid alcohols are used as fuel is related to properties of the electrolytic polymer membrane: fuel which is fed to the anode compartment moves through the membrane towards the cathode compartment leading to a lower fuel utilization factor. At the same time, this quantity of fuel is oxidized on the cathode catalyst. This results in the development of a mixed potential between the anode and cathode electrodes, and consequently, in a cell performance deterioration. The confrontation of these two main low temperature fuel cell drawbacks is the subject of interest of the scientific community the past few years. The electrolytic polymer membranes that have been used more extensively in low temperature fuel cells are mainly perfluorosulfonic acid membranes (PFSA). The main representative is Nafion, developed in the ‘60s by DuPont. One of the main properties that must characterize the polymer membrane, besides its conductivity, is the fact that it must keep the reactants fed at the anode and at the cathode separated. In the liquid alcohol case, as mentioned before, this does not apply in reality, thus inhibiting an optimized cell performance. The mechanism of the fuel movement through the membrane is not fully understood in detail, however the understanding of this mechanism is of crucial importance in order to determine the cell operating conditions under which this motion can be limited together with the power losses that are induced by it. Other polymer membranes have been developed as well in order to replace the commonly used PFSA membranes, especially for high temperature operation. However, they are still inferior in terms of both conductivity and chemical stability under the desired operating conditions. Therefore, much interest is focused on the optimization of Nafion based DEFC performance. In the present thesis, the low temperature direct ethanol fuel cell operation is studied, emphasizing on the effect of the electrolyte characteristics on the cell’s performance. Effort is put on the understanding of the liquid reactant crossover through the membrane on the cell performance. More specifically, the effect of the electrode preparation procedure on the fuel mass transport rate through the membrane is studied. A systematic and comparative study of the ethanol and water mass transport rates through different Nafion based Membrane Electrode Assemblies (MEAs) is undertaken. The aim of this study is to determine the parameters that affect the movement of ethanol and water through the membrane electrolyte in order to standardize the conditions under which the fuel utilization is maximized, while at the same time the water management in the cell system is optimized. Finally, the effect of the reactive environment in which the fuel cell operates on the chemical stability of the polymer and on the cell’s lifetime is also studied. It is proved that the electrochemical conditions under which the cell operates deteriorate significantly the polymer properties and the cell’s performance.
Degree
thesis:*- Grantor dc:publisher
- University of Thessaly (UTH)
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Stergiopoulos, Vaios
- Στεργιόπουλος, Βάιος
Subjects
dc:subject × 21- Κυψελίδες καυσίμου (χαμηλής θερμοκρασίας)
- Αιθανόλη
- Πολυμερικοί ηλεκτρολύτες
- Απευθείας τροφοδοσία αιθανόλης
- Ηλεκτροοξείδωση αιθανόλης
- Διμεταλλικοί ηλεκτροκαταλύτες
- Παρασκευή ηλεκτροδίων
- Fuel cells (low temperature)
- Ethanol
- Polymer electrolytes
- Direct ethanol feed
- Ethanol electro-oxidation
- Bimetallic electrocatalysts
- Trimetallic electrocatalysts
- Electrode preparation
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Mechanical Engineering
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/25644