University of Patras
Μοντελοποίηση και έλεγχος ρευστοδυναμικών συστημάτων με χρήση έξυπνων υλικών
Abstract
dc:descriptionThe present PhD thesis has a key object the analysis and control of fluid dynamics systems taking advantage of the smart material properties like piezocrystals for the design of actuators. In Part I the performance of a prototype piezohydraulic pump is estimated using the Finite Element Method. The specific setup consists of a piston and two passive valves with an operating frequency greater than 100Hz. The developed Finite Element Model takes into account fluid's compressibility the limited pressure wave propagation, turbulent flow and Fluid Structure Interaction of the valves with the fluid Simulation results were used to calculate the pump's performance and a parametric optimization of valve's key parameters is performed. Much higher operating frequencies (500Hz) with improved performance is achieved. In the sequel, studies on an ideal active valve system are undertaken and control techniques of valve timing are developed Simulations revealed the potential benefit from an active valve system and also revealed the importance of accounting wave propagation phenomena, especially during resonance. In Part II, a novel fluid actuator based on the exploitation of fluid resonance is proposed. This approach allows the integration of the pump within the actuator, whereas only one high frequency valve is needed, in contrast with existing systems where two high frequency valves are needed (inlet, outlet). The novel actuator is modeled using a direct discretization of the compressible Navier Stokes equations and a state space model is derived. Along with the piezoelectric and valve flow model a complete model of the actuator is formulated. The key components of the model are verified with experimental data from a prototype actuator. Also the concept of the new actuator is proved by experimental measurements. At the last section of the thesis key aspects of the systems for further improvement of the actuator are proposed.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2011
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Koveos, Yannis
- Κωβαίος, Ιωάννης
Subjects
dc:subject × 14- Μοντελοποίηση ρευστών
- Έλεγχος ρευστών
- Πιεζουδραυλικά συστήματα
- Επενεργητές
- Έξυπνα υλικά
- Fluid modeling
- Fluid control
- Piezohydraulic systems
- Actuators
- Smart materials
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Engineering and Technology
- Electrical Engineering, Electronic Engineering, Information Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/25675