Back to search

University of Patras

Ανάπτυξη μεθοδολογιών για τη μη-γραμμική ανάλυση κατασκευών μεγάλης κλίμακας

Abstract

dc:description

The design and development of low-cost products, with simultaneous fulfilment of the requirements for higher performance and safety, is one of the biggest challenges for the research engineers and the industry. Especially in the sectors of the structural industry (aeronautics, shipbuilding, automotive, space industry) where the products are being produced according to the latest achievements of the technology, the engineer is obliged to design new products with higher proficiency, without neglecting the need for lower cost and development time. This trend has great application mainly in the aeronautical industry, where the reduction of the remarkable cost for the development of a new aircraft, without downgrading the level of safety and the quality of service comprises the main target of the current research effort. The main factor that weighs down the development of new aircrafts, as far as the cost and the time is concerned, is the required experimental tests of the full/large scale under service loads, which affect significantly the development cost and the time to market. These tests are included in the design process, in order to verify the results of the corresponding structural analyses. The importance of the experimental tests and specifically these of the full scale level is amplified by the fact that they are being imposed during the certification process by the Airworthiness Authorities, since the structural analyses of the corresponding scale (full scale) do not provide adequate results. The above mentioned inability of the structural analyses of providing adequate results is based on two main characteristics of the large scale structures. Firstly, the failure prediction in aeronautical (among others) structures requires non-linear analysis, for reasons related to the material behaviour (non-linear behaviour due to composite material damage, elastoplastic behaviour of metallic materials) and the structural behaviour (geometrical non-linearity, contact problems). Secondly, in these structures there is great difference between the dimensions of the local damage initiation region and the dimensions of the whole structure, with the latter being related with the total collapse. The simulation with numerical methods, especially with the use of Finite Elements, of the structural behaviour of large scale structures with the above characteristics, leads to million DOFs (Degrees Of Freedom), whose solution requires non-linear numerical methods. The combination of the size of these models with their non-linear nature renders the problem non-solvable using conventional methodologies and is in fact the reason for the, up to now, not thoroughly utilization of virtual testing (numerical simulations), that would lead to the minimization of the number or even to the complete avoidance of the extensive and costly experimental tests. Based on the above, main objective of this Thesis is the development of new, reliable and integrated methodologies for the non-linear analysis of large scale structures, targeting mainly in the satisfactory prediction of phenomena related to the initiation of local damage, but also being able to evolute up to the appropriate scale (maybe full scale), in order to account the structural behaviour of the whole structure up to the total collapse. On this basis, innovative methodologies are being developed for the structural non-linear analysis and appropriate modifications are proposed for already well-established techniques, in order to be applied on large scale structures. Due to the advantages offered from the rapid and constant progress of computers (speed, memory, software) and the wide usage of commercial tools that are based on the matrix theory (Finite Elements, Boundary Elements), the above mentioned methodologies were developed based on the philosophy of ‘virtual testing’. Due to the fact that the numerical solution methods for non-linear problems in large scale structures are not able to provide adequate results, as mentioned previously, in the present work alternative methodologies and techniques were investigated, approaching the technological problem from the engineer’s view and reliable solutions applicable to an industrial environment were proposed. The procedure that was followed consists of four basic keystones: the linear numerical stress analysis of the whole structure, the check for possible local non-linear behaviour, the local damage analysis (non-linear analysis) and a series of appropriately configured sub-routines, able to redefine the contribution of the regions exhibiting local damage in the structural behaviour of the whole structure. All the routines of the proposed methodologies were accomplished using the commercial Finite Element code ANSYS. The linear numerical stress analysis of the structure was carried out with the use of numerical models simulating the whole structure, divided into suitable parts, based on the geometrical repeatability. The calculated stresses were utilized for the prediction of the local damage, using properly developed damage criteria, depending on the type of non-linearity. The corresponding regions detected, were classified according to the criticality level (critical load) and were elaborated with local analyses of non-linear nature for the simulation of local damage initiation. For the accumulation of the contribution of the local damage in the structural behaviour of the whole structure, appropriate techniques were developed for the description of the local damage and its incorporation in the structural features of the numerical model of the structure. For the determination of the damage evolution, from the first detection up to the final failure, the procedure was performed in an incremental and iterative way. It was proved, that under specific assumptions, the proposed methodologies simulating the non-linear phenomena of large scale structures are capable of providing accurate results, in accordance with those of the experimental tests of full scale level. Simultaneously, the proposed methodologies become also efficient, providing that they have been developed appropriately, in order to focus the available computer resources on the non-linearly behaving regions by the ‘on demand’ application of the non-linear analyses.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2010

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Belesis, Stefanos
  • Μπέλεσης, Στέφανος

Subjects

dc:subject × 14

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/25804

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Belesis, Stefanos; Μπέλεσης, Στέφανος. Ανάπτυξη μεθοδολογιών για τη μη-γραμμική ανάλυση κατασκευών μεγάλης κλίμακας. University of Patras, 2010. http://hdl.handle.net/10442/hedi/25804