Abstract
dc:descriptionThe objective of this thesis is the parallel manipulation and the open loop/sensorless assembly of microparts without microrobots. Research was focused on the manipulation: a) of 3D force fields, b) of programmable planar force fields, c) of microparts enclosed in droplets of liquid and d) with self assembly using electrostatic forces. Firstly, a procedure of theoretical expansion of the existing 2D force fields for the manipulation of microparts in 3 dimensions is presented. The target is 3D manipulation which is comprised of the application of three fields for transport centering and rotation of microparts. Additionally, a new method for the generalized mathematical formulation and production of a programmable force field for the sensorless open loop manipulation of polygonal microparts of various shapes on microactuator arrays. The application and programming of the produced field onto a cilia microactuator array is presented along with a possible electronic circuitry design for the programming and actuation of the array. The manipulation capabilities are examined through simulations for various simple convex and non convex shapes of microparts and the results show successful positioning and orientation in the desired final configuration. A concept of the manipulation of microparts enclosed in droplets of liquid is also presented which is based on the combination of the phenomena of electrowetting dielectrophoresis and self assembly with surface tension. Initially the droplet is modeled with finite elements during the stage of electrowetting in order to verify the tendency of droplet motion towards the energized electrode. During the dielectrophoresis stage a non homogeneous electric field is created from a pin ring setup of electrodes and the tendency of droplet motion towards the pin electrode is also verified. The results from experiments of the dielectrophoresis of droplets on a PCB board with printed pin ring electrodes are then presented and categorized. Finally, a new methodology which utilizes electrostatic forces for the accurate self alignment and batch assembly of microparts is introduced. Tiny electrodes on the parts and the substrate act as binding sites. By investigating the dependence of the electrostatic force to various parameters using modeling with finite elements a semi empirical fitted force model is produced for square and circular electrodes. With the use of these force models design rules for the geometry and placement of the electrodes are produced and simulations of the motion of microparts under the influence of the electrostatic forces are performed. The results verify both the alignment procedure and the introduced design rules as we can fully predict the motion of microparts.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Lazarou, Panagiotis
- Λαζάρου, Παναγιώτης
Subjects
dc:subject × 16- Συναρμολόγηση μικροαντικειμένων
- Μικρορομποτική
- Αυτοσυναρμολόγηση
- Διηλεκτροφόρηση
- Ηλεκτροδιαβρεκτικότητα
- Προγραμματιζόμενα πεδία δυνάμεων
- Assembly of microparts
- Microrobotics
- Self-assembly
- Dielectrophoresis
- Electrowetting
- Programmable force fields
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Engineering and Technology
- Mechanical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/25813